User's Manual

Freezing and storing food
49
Before placing food in the appliance
 When freezing more than 2kg of
fresh food, switch on the SuperFreeze
function for some time before placing
the food in the freezer (see “Using
SuperFreeze, SuperCool and
DynaCool - SuperFreeze function”).
This helps food which is already stored
in the freezer to stay frozen.
Placing food in the freezer
 Risk of damage due to heavy
loads.
Loading food which is too heavy can
cause damage to the freezer
drawers/glass plates.
Do not exceed the maximum load:
– freezer drawer = 25kg
– glass plate = 35kg
Unfrozen food should not touch
frozen food as this will cause frozen
food to begin to thaw.
 Make sure that the packaging and
containers are dry to prevent them
sticking together when frozen.
–Freezing small amounts of food
Freeze small items in the upper freezer
drawers.
 Place the food flat in the bottom of
the freezer drawer so that it freezes
through to the core as quickly as
possible.
–Freezing the maximum amount of
food
If the ventilation gaps are blocked
the cooling performance will
decrease and energy consumption
will increase.
When placing food in the freezer,
make sure that the ventilation gaps
are not blocked.
Please note that when removing the
drawers, the lowest freezer drawer
must always remain in the appliance.
 Remove the upper freezer drawers.
 Place the food flat on the upper glass
plates so that it freezes through to the
core as quickly as possible.
After the initial freezing process:
 Place the frozen food in the freezer
drawer and push it back in.