User's Manual

Table Of Contents
Adjusting the interior fittings (refrigerator section)
45
Adjusting the door shelves/
bottle shelf
Only move door/bottle shelves when
they are empty.
Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Moving the adjustable shelves
Stoppers prevent the shelves from
being dislodged by mistake.
The shelves can be adjusted
according to the height of the food.
1. Lift the shelf up slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upward to
prevent food from touching the back
wall of the appliance and freezing to it.
Adjusting or removing the
bottle holder
The bottle holder can be moved to the
left or right to create more room for
drink cartons.
The bottle holder can be removed, for
example for cleaning:
Detach the bottle holder from the
back edge of the bottle shelf.
The bottle holder can be replaced after
cleaning.