Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of cabinet fronts
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet fronts
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the retaining brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Selecting additional settings
71
Switching Eco Mode on or
off
Eco Mode is useful when you are going
on vacation, for example, and you do
not wish to switch off the appliance
completely or do not need a high de-
gree of cooling. Energy consumption in
Eco Mode is lower than in normal opera-
tion.
The fridge zone is regulated to a tem-
perature of 43°F (6°C); the dry compart-
ment in the SmartFresh zone is regu-
lated to approx. 37°F (3°C).
The freezer zone is regulated to a tem-
perature of 3°F (-16°C).
If the Automatic SuperCool or Super-
Frost function is switched on, these
will be automatically switched off when
Eco Mode is selected.
In Settings mode , use the and
sensor controls to select the Eco
Mode and select OK to confirm your
selection.
Use the and sensor controls to
switch Eco Mode On or Off and select
OK to confirm your selection.
Only the changed temperatures in the
display indicate that Eco Mode is
switched on.
Tip: You can also switch off the Eco
Mode function by directly adjusting the
temperature (see “The correct tem-
perature – Setting the temperature”).
Health risk caused by decom-
posing food.
Storing food at a temperature higher
than 0°F (-18°C) in the freezer zone
for an extended period of time may
impair the storage life and quality of
the food.
Only ever switch on the Eco Mode
function for a limited period.
When switching to the Eco Mode
function, check that the food in the
freezer zone is already properly
frozen.
Do not freeze any new food while the
Eco Mode function is switched on.
Health risk caused by decom-
posing food.
The usability and quality of food in
the fridge zone may deteriorate if the
temperature remains above 37°F
(4°C) for an extended period.
Only ever switch on the Eco Mode
mode for a limited period.
Do not store any temperature-sensi-
tive food which spoils easily, such as
fruit, vegetables, fish, meat, and
dairy products, during this time.