Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of cabinet fronts
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet fronts
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the retaining brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
47
Securing the covers
Before the cover can be installed
in the gap above the refrigeration ap-
pliance, it must be assembled as fol-
lows:
Insert the two parts of the cover into
one another.
Cover viewed from the side
Place the assembled cover into
the gap above the refrigeration appli-
ance so it clicks into place. While do-
ing so, slide both parts of the cover
together as required.
Installing the cover in a side-by-side
combination
Insert the joining peg (from the side-
by-side installation kit) halfway into
the channel in the cover for the left-
hand appliance.
Place the second cover onto the join-
ing peg and press the two covers to-
gether.
Click the two covers together into the
gap above the refrigeration appli-
ances.