Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of cabinet fronts
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet fronts
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the retaining brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
25
Dimensions when the appliance door is open (opening angle 90°/115°)
3/8" (10 mm)
A
D
B
C
A B* C* D (with a cabinet
front of 3/4" (19mm))
KF2802Vi,
KF 2812 Vi
32 5/8"
(829mm)
Cabinet front
3/4"-1 1/2"
(19–38mm)
Door handle 14 5/16" (363mm)
KF2902Vi,
KF 2912 Vi
38 11/16"
(982mm)
Cabinet front
3/4"-1 1/2"
(19–38mm)
Door handle 16 7/8" (428mm)
* The dimensions of the cabinet front and the door handle vary depending on the
design of the kitchen.