Operating and Installation instructions

Storing food in the MasterFresh zone
100
The moisture regulator is used to regu-
late the amount of moisture in the hu-
midity-controlled compartment with
settings  to .
Position of the moisture regulator
= slightly increased humidity
Select this setting if you store very
large quantities of fruits and vegeta-
bles in the humidity-controlled com-
partment. The moisture regulator par-
tially closes the vents in the compart-
ment so that some of the moisture
present is retained.
Position of the moisture regulator
= increased humidity
Select this setting if you store small
to large quantities of fruits and vegeta-
bles in the humidity-controlled com-
partment. The moisture regulator closes
the vents in the compartment com-
pletely so that all of the moisture
present is retained.
Tip: If the humidity level is too high and
a lot of moisture has collected in the
compartment, select the setting.
If the quantity of food being stored in
this compartment is small, the moisture
level may be too low. If you are only
storing a small amount of food, wrap it
in airtight packaging.
Increased moisture in the humidity-
controlled compartment can, in
some circumstances, cause a build-
up of condensate.
Wipe off any condensate with a
cloth.
Regulating the humidity level in the
humidity-controlled compartment
 Slide the moisture regulator to the
left or right depending on the
setting required.