Pre-finished 36” MasterCool K 2902 SF F 2912 SF KF 2902 SF / KF 2912 SF KF 2982 SF Shown: K 2982 SF Info subject to change 8mieleusa.
Pre-finished 36” MasterCool SPECIFICATIONS Overall Unit Dimensions 353/4” (908 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Excludes Fascia Dimension] Overall Fascia Dimensions 361/2” (927 mm) W x 84”- 8511/16” (2134 - 2175 mm) H x 11/2” (32 mm) D Niche Minimum Cabinet Niche Opening 36” (915 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 24” (610 mm) D Electrical K 29x2 SF Electrical Requirements 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separate outlet mu
Pre-finished 36” MasterCool CUTOUT DIMENSIONS Please note unit’s outer SF frame. Top view: Niche/Cabinetry 3/4” (19) Stainless steel door 9/32” (7) SF frame CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor.
Pre-finished 36” MasterCool POWER SUPPLY AND WATER CONNECTION (Water Connection For F 29x2 SF & KF 29x2 SF Only) Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Pre-finished 36” MasterCool HINGING DETAILS 115° OPENING Available for the following models: • K 29x2 SF • F 29x2 SF • KF 29x2 SF 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.4mm) 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) 0-3 /4” 1-1 1-1 /2” DOOR SWING AT 115° OPENING /4” (38 1” ( (32 mm 25 mm ) (19 mm 3”(76.2mm) 1-3/4”(44.
Pre-finished 36” MasterCool HINGING DETAILS 90° OPENING Available for the following models: • K 29x2 SF • KF 29x2 SF 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2” (51 mm) 1-3/16” (30mm) 90° Door 1-7/16” (36.5mm) 7/16” (11 mm) 0-1/8” (3 mm) 115° Door Thickness options1-11/16” (43mm) 1-15/16” (49.
