Operating & Installation Instructions

Selecting additional settings
66
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your appliance.
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Set up again and select OK to
confirm your selection.
Reset configuration? will appear on the
display.
 Use the and sensor controls to
select Yes or No and select OK to
confirm your selection.
Resetting the network configuration
Reset the refrigeration appliance’s set-
tings to the default settings when dis-
posing of your refrigeration appliance,
selling it, or putting a used refrigera-
tion appliance into operation. This will
reset the network configuration so that
all personal data is deleted from the
refrigeration appliance. This will also
ensure that a previous owner is no
longer able to access the refrigeration
appliance.
 Reset the settings of the refrigeration
appliance as described under “Reset-
ting the settings to their default set-
tings”.
Switching off Demo Mode
Demo mode allows the appliance to
be presented in the showroom with-
out the cooling system being
switched on. Do not activate this set-
ting for domestic use.
If Demo mode has been switched on
as a default setting, will show on the
display.
 In Settings mode, use the and
sensor controls to select Demo
Mode and select OK to confirm your
selection.
Press OK for 4 seconds to deactivate will
appear on the display.
 Follow the instructions on the display.
The countdown Demo Mode will deacti-
vate in seconds. appears on the display.
Demo Mode deactivated. The appliance will
cool down. will appear on the display.
 Confirm the message with OK.
The main screen appears on the display
again.