Operating & Installation Instructions

Cleaning and care
104
Cleaning the water filter (Inten-
siveClear 2.0 mesh filter) (see
“Optional accessories”)
Depending on the quantity of ice cubes
produced, the IntensiveClear 2.0 mesh
filter must be cleaned approx. every
6months.
You can use the Replace the water filter
display on the display as a reminder to
clean the water filter.
1.
2.
 Turn the cap of the filter cartridge
counterclockwise until it is in the ver-
tical position 1. and slide it out of the
filter opening 2.
3.
 Pull the mesh out of the back of the
filter cartridge 3.
 Rinse the mesh under running luke-
warm water. Turn the mesh over un-
der the running water to clean it on all
sides.
4.
 Reinsert the mesh into the back of
the filter cartridge 4.
5.
 Slide the filter cartridge as far as it
will go into the filter opening 5., mak-
ing sure the cap is vertical.