Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Securing the toe-kick board and cover
- Aligning the appliance doors
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- Switching / on or off
- Switching on or off
- Performing a
- Switching on the
- Switching off the
- Setting up Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele@mobile App
- Connecting your appliance via the Miele@mobile app
- Connecting your refrigeration appliance via WPS
- Deactivating Miele@home
- Activating Miele@home
- Checking the WLAN connection status
- Setting up Miele@home again
- Resetting the network configuration
- Switching off
- Resetting the settings to their default settings
- Switching mode on or off
- Switching on or off
- Switching on, switching off, or resetting the
- Switching on, switching off, or resetting the
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Using Automatic SuperCool and SuperFreeze
79
AutomaticSuperCool func-
tion
The AutomaticSuperCool function can
be used to rapidly reduce the tempera-
ture in the refrigerator section to its low-
est setting (depending on the room
temperature).
AutomaticSuperCool is particularly rec-
ommended for the rapid chilling of large
amounts of fresh food or drink.
Switching on AutomaticSuperCool
Touch the sensor control to set the
temperature.
Use the and sensor controls to
select the temperature display of the
fridge zone and select OK to confirm
your selection.
Touch the sensor control to switch
the AutomaticSuperCool function on.
The symbol is highlighted in color
and the newly set temperature value of
35°F (2°C) appears on the display.
Confirm the setting with OK or wait
approx. 8seconds after the last press
of the button. The setting will be au-
tomatically adopted.
The symbol will light up on the tem-
perature display for the fridge zone.
The appliance will now run at maximum
power.
Switching off AutomaticSuperCool
Touch the sensor control to set the
temperature.
Use the and sensor controls to
select the temperature display of the
fridge zone and select OK to confirm
your selection.
The symbol is highlighted in color
and the temperature value of 35°F (2°C)
is shown on the display.
Touch the sensor control to switch
the AutomaticSuperCool function off.
The symbol is no longer highlighted
in color and the previous temperature
setting appears again on the display.
Confirm the setting with OK or wait
approx. 8seconds after the last press
of the button. The setting will be au-
tomatically adopted.
The symbol will disappear from the
temperature display for the fridge zone.
The refrigeration appliance will continue
running at normal power.
If you do not turn off the AutomaticSu-
perCool function, it will turn itself off au-
tomatically after approx. 6hours. The
appliance will then run at normal power
again.
Tip: To save energy, the AutomaticSu-
perCool function should be switched off
once food and drinks are sufficiently
chilled.