Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Securing the toe-kick board and cover
- Aligning the appliance doors
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- Switching / on or off
- Switching on or off
- Performing a
- Switching on the
- Switching off the
- Setting up Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele@mobile App
- Connecting your appliance via the Miele@mobile app
- Connecting your refrigeration appliance via WPS
- Deactivating Miele@home
- Activating Miele@home
- Checking the WLAN connection status
- Setting up Miele@home again
- Resetting the network configuration
- Switching off
- Resetting the settings to their default settings
- Switching mode on or off
- Switching on or off
- Switching on, switching off, or resetting the
- Switching on, switching off, or resetting the
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Selecting additional settings
72
Switching Vacation mode on
In Settings mode , use the and
sensor controls to select the Vaca-
tion and select OK to confirm your se-
lection.
Use the and sensor controls to
select On and select OK to confirm
your selection.
14°C (57°F) is now displayed on the
temperature display for the fridge zone
and the interior lighting in the fridge will
go out.
The symbol will appear on the tem-
perature display for the fridge zone.
Switching Vacation mode off
In Settings mode , use the and
sensor controls to select the Vaca-
tion and select OK to confirm your se-
lection.
Use the and sensor controls to
select Off and select OK to confirm
your selection.
The temperature you had set previously
is now displayed on the temperature
display for the fridge zone and the inte-
rior lighting in the fridge zone will go on
again.
The symbol will disappear from the
temperature display for the fridge zone.
Switching Sabbath Mode on
or off
The refrigeration appliance has a Sab-
bath Mode to support the observance of
religious customs.
When Sabbath Mode is switched on,
you cannot make any settings on your
refrigeration appliance.
Ensure that the appliance door is
properly closed, as visual and audible
alarms are switched off in Sabbath
Mode.
In Settings mode, use the and
sensor controls to select Sabbath
Mode and select OK to confirm your
selection.
Use the and sensor controls to
select On or Off and select OK to con-
firm your selection.
When Sabbath Mode is switched on,
will appear on the display and the
display brightness will be reduced (the
display does not change when the ap-
pliance door is closed).
When Sabbath Modeis switched on,
the following functions are switched off:
- Door Assistant
(for cabinet fronts without handles,
the appliance door will have to be
pulled from the bottom or side)
- Lighting
- All audible and visual signals,
- Temperature display
- The Automatic SuperCool function (if
previously switched on)