Operating and Installation Instructions

Selecting additional settings
59
In settings mode, certain settings
can be adjusted and functions selected,
allowing you to adjust the machine to
suit your requirements.
The following section only describe the
functions in settings mode  that re-
quire further explanation.
The door alarm and other warnings
are automatically disabled when the
appliance is in settings mode .
Switching Keypad Lock/
on or off
Switch Keypad Lock on if you wish to
protect your refrigeration appliance
from unwanted temperature changes or
other unintentional adjustments in Set-
tings mode .
 In Settings mode, use the and
sensor controls to select Keypad
Lock and select OK to confirm your
selection.
 Use the and sensor controls to
switch the sensor lock On or Off and
select OK to confirm your selection.
 The keypad lock will not be activated
until you close the appliance door.
Nothing will appear on the display to in-
dicate that the keypad lock is switched
on.
The message Press OK for 6 seconds to
unlock will appear on the display if you
select a sensor control while the sensor
lock is switched on.
 Follow the instructions on the display.
The display is unlocked briefly so you
can adjust the setting as required. Clos-
ing the appliance door will reactivate
the sensor lock.