Operating and Installation Instructions

Before first use
55
Inserting the Active AirClean filters
Your refrigeration appliance is equipped
with 2Active AirClean filters which neu-
tralize unpleasant odors in the refrigera-
tor section.
 Insert the Active AirClean filters sup-
plied as described under “Cleaning
and care – Replacing the Active Air-
Clean filters”.
Operating the refrigeration ap-
pliance
The touch display can be scratched
by pointed or sharp objects, e.g.,
pens.
Only touch the display with your fin-
gers.
If your fingers are cold, the touch
display may not react.
°F
39


°F
39





0
°F

The sensor controls underneath the
temperature display can be selected
directly by touch; the symbols and text
in or above the temperature display can
only be displayed.
Settings mode
In Settings mode, you can select
different refrigeration appliance func-
tions and alter their settings to some
extent (see “Selecting additional set-
tings”).
 Touch the sensor control to open
Settings mode.
 Use the  and sensor controls to
select the function for which you wish
to adjust the settings.
 Confirm your selection with OK.
 Adjust the settings using either the 
and sensor controls or the  and
sensor controls.
 Confirm your selection with OK.
The setting with the colored back-
ground is always the selected setting;
it can be confirmed directly with OK.
 Touch the  sensor control if you
wish to switch to the previous menu
level or terminate the process.
Every touch of the display is con-
firmed with an audible keypad tone.
You can switch off this keypad tone in
Settings mode.