Operating and Installation Instructions

Frequently Asked Questions
119
Messages in the display
Message Possible cause and solution
The warning sounds
and the message Freezer
temperature too high. Max.
temperature °C appears
on the display.
The temperature in the appliance has risen signifi-
cantly.
This could be due to, for example:
– the appliance door being opened too often, or
being left open
– a large amount of food being frozen at once
– an extended power failure
 If you find the alarm disruptive, you can switch it
off in advance by touching the OK sensor control.
The alarm will stop.
 Rectify the cause of the alarm.
The message will disappear from the display and the
alarm will stop.
The temperature display will show the highest tem-
perature that was reached during the time in which
the temperature in the freezer zone rose.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.
 In the event of a power failure, check whether
there are any ice cubes in the ice cube container
and dispose of these. Otherwise, the ice cubes will
freeze together and can damage the ice cube con-
tainer when they expand.
The warning sounds
and the message Close
the door appears on the
display.
The appliance door is open.
 Close the appliance door.
 If you wish to turn the alarm off early, touch the
sensor control OK on the display.
The alarm will stop.
The temperature display
is dark and the sym-
bol is shown on the dis-
play.
The Sabbath Mode function is switched on. The in-
terior lighting is switched off and the refrigeration ap-
pliance is cooling down.
 You can switch off Sabbath mode at any time (see
“Selecting additional settings – Switching Sabbath
Mode on or off”).