Operating and Installation Instructions

Selecting additional settings
78
Deactivating Miele@home
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Deactivate and select OK to
confirm your selection.
Deactivation successful will appear on the
display.
 Confirm the message with OK.
Your refrigeration appliance is now dis-
connected from your WLAN network.
The  symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to reac-
tivate the connection.
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Activate and select OK to con-
firm your selection.
Activation successful will appear on the
display.
 Confirm the message with OK.
If the WLAN connection is active,  will
appear on the display.
Checking the WLAN connection sta-
tus
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Connection status and select OK
to confirm your selection.
Information about the WLAN connec-
tion status will then appear on the dis-
play:
- connected: there is a strong con-
nection
- connected: there is an average
connection
- connected: there is a weak con-
nection
- disconnected
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your appliance.
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Set up again and select OK to
confirm your selection.
Reset configuration? will appear on the
display.
 Use the and sensor controls to
select Yes or No and select OK to
confirm your selection.