Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
 - Caring for the environment
 - Installation
- Installation location
 - Installation notes
 - Specifications for the plumbed water connection
 - Installation dimensions
 - Dimensions of cabinet fronts
 - Building in the appliance
- Before starting...
 - Tools required
 - Weight of cabinet fronts
 - Aligning the installation niche
 - Checking the installation niche
 - Before installation
 - Preparing the installation niche
 - Pushing the appliance into the niche
 - Aligning the refrigeration appliance
 - Securing the appliance in the niche
 - Preparing the cabinet fronts
 - Securing and aligning the cabinet front
 - Mounting the retaining brackets
 - Securing the covers
 - Installing the cover in a side-by-side combination
 - Securing the toe-kick ventilation grille and toe-kick cover
 - Limiting the opening angle of the appliance door
 
 - Water connection
 - Electrical connection
 
 - Saving energy
 - Guide to the appliance
 - Accessories
 - Before first use
 - Switching on and off
 - Selecting additional settings
 - The correct temperature
 - Using Automatic SuperCool and SuperFreeze
 - Temperature and door alarm
 - Adjusting the interior fittings
 - Storing food in the refrigerator section
 - Storing food in the MasterFresh zone
 - Freezing and storing food
 - Making ice cubes
 - Automatic defrosting
 - Cleaning and care
 - Water filter
 - Frequently Asked Questions
 - Causes of noises
 - Customer Service
 - Declaration of conformity
 - Copyrights and licenses
 
 
Water filter
118
Performance Data Sheet
Model: Miele 07134220
Use Replacement Cartridge 07134220
NSF System Trade name: WFS200MF & WFS210MF
NSF Replacement Cartridge No: WFC100MF(for WFS200MF) & WFC110MF(for WFS210MF)
 System tested and certified by NSF International against NSF/ANSI
 Standard 42, 53, 401 for the reduction of the claims listed below.
This system has been tested according to NSF/ANSI 42, 53, 401 for reduction of the substances listed below. 
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to 
the permissible limit for water leaving the system, as specified in NSF/ANSI 42, 53, 401.
4ubstance
Influent Dhallenge 
concentration
Average Seduction
Reduction 
requirement
Max Qermissible Qroduct 
water concentration
Chlorine Uaste and 
Pdor
2.0mg/L ± 10% 97.2% ≥ 50% N/A
$hloramine 3.0mg/L ± 10% 97.2% N/A 0.5 mg/L
1articulate, Class I 
particles ≥0.5 to <1 μm
at least 10,000 
particles/mL
>99.9% ≥ 85% N/A
"trazine 0.009mg/L ± 10% >94.4% N/A 0.003mg/L
#enzene 0.015mg/L ± 10% >96.8% N/A 0.005mg/L
$arbofuran 0.08mg/L ± 10% >98.8% N/A 0.04mg/L
p-%ichlorobenzene 0.225mg/L ± 10% >99.8% N/A 0.075mg/L
Lead pH6.5 0.15mg/L ± 10% 98.8% N/A 0.010mg/L
Lead pH8.5 0.15mg/L ± 10% 97.9% N/A 0.010mg/L
Mercury pH6.5 0.006mg/L ± 10% >96.5% N/A 0.002mg/L
Mercury pH8.5 0.006mg/L ± 10% >96.6% N/A 0.002mg/L
5urbidity 11 ± 1 NTU 99.1% N/A 0.5 NTU
&thylbenzene 2.1mg/L ± 10%  >99.9% N/A 0.7mg/L
5oxaphene 0.015mg/L ± 10%  >93.3% N/A 0.003mg/L
"sbestos
10
7
 to 10
8
 fibers/L; 
fibers greater than 
10 μm in length
>99% 99% N/A
$yst minimum 50,000/L  99.99% 99.95% N/A
Meprobamate 400ng/L ± 20% >95.2% N/A 60ng/L
Atenolol 200ng/L ± 20% >95.6% N/A 30ng/L
Carbamazepine 1,400ng/L ± 20% >98.6% N/A 200ng/L










