Operating instructions Refrigerator To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions...................................................................... 5 Caring for the environment .............................................................................. 15 Installation.......................................................................................................... Installation site..................................................................................................... Side-by-side combinations ........................
Contents The correct temperature................................................................................... Temperature display ............................................................................................ Setting the temperature....................................................................................... Possible temperature settings ........................................................................ 38 38 39 39 Using Super cool and DynaCool .........................
Contents Problem solving guide ...................................................................................... 64 The interior lighting is not working ...................................................................... 69 Noises................................................................................................................. 71 Service................................................................................................................ Contact in the event of a fault .....
Warning and Safety instructions This refrigeration appliance complies with current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please read the operating and installation instructions carefully before using the refrigeration appliance for the first time. They contain important information on safety, installation, use and maintenance. This is to protect yourself from injury, and from damaging your refrigeration appliance.
Warning and Safety instructions This refrigeration appliance is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations or similar substances or products that are subject to the Medical Device Directive. Incorrect use of the refrigeration appliance for such purposes may cause deterioration of the items stored. The refrigeration appliance is also not suitable for use in areas where there is a risk of explosion.
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the refrigeration appliance unless they are constantly supervised. Children 8 years and older may only use the appliance unsupervised if they have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation. Children must not be allowed to clean or maintain the appliance unsupervised.
Warning and Safety instructions Technical safety The coolant circuit has been checked for leaks. The refrigeration appliance complies with statutory safety requirements and the appropriate EU directives. This refrigeration appliance contains the refrigerant isobutane (R600a), a natural gas which is environmentally friendly but flammable. The refrigerant does not damage the ozone layer and does not contribute to the greenhouse effect.
Warning and Safety instructions To avoid the risk of damage to the appliance, make sure that the connection data (fuse rating, frequency and voltage) on the data plate corresponds to the household supply. Check that this is the case before connecting the appliance. Consult a qualified electrician if in any doubt. The electrical safety of this appliance can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met.
Warning and Safety instructions This appliance must not be used in a non-stationary location (e.g. on a ship). Do not use a damaged appliance. It could be dangerous. Check the appliance for visible signs of damage. For safety reasons, this appliance may only be used after it has been built in. The appliance must be isolated from the electricity supply during installation, maintenance and repair work. Unauthorised installation, maintenance and repairs can cause considerable danger for the user.
Warning and Safety instructions Change the door hinging (if necessary) as described in the installation instructions supplied with the appliance. Only install the refrigeration appliance in a solid, rectangular and level housing unit, positioned on an even and level floor.
Warning and Safety instructions Correct use This refrigeration appliance is designed for use within specific ambient temperatures (climate range). Do not use in ambient temperatures for which it is not designed. The climate range is stated on the data plate in the interior cabinet of the refrigeration appliance. A lower ambient temperature will cause the compressor to switch off for longer periods, meaning that the refrigeration appliance is unable to maintain the required temperature.
Warning and Safety instructions Accessories and spare parts Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the warranty, and Miele cannot accept liability. Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your refrigeration appliance.
Warning and Safety instructions Transport Always transport the appliance in an upright position and in its original transport packaging to avoid damage in transit. Danger of injury and damage to the appliance. The refrigeration appliance is very heavy and must be transported by two people. Disposal of your old appliance If your old refrigeration appliance has a door lock, destroy it. This will prevent the risk of children playing accidentally locking themselves in and endangering their lives.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety.
*INSTALLATION* Installation Installation site Risk of damage and danger of injury due to the refrigeration appliance tipping over. This refrigeration appliance is very heavy and can tip forwards when the appliance door is open. Keep the appliance door(s) closed until the refrigeration appliance has been built in. The refrigeration appliance must be secured in its buildingin niche in accordance with the operating and installation instructions.
*INSTALLATION* Installation Risk of damage due to high hu- Climate range midity. In environments with high humidity, condensation can build up on external refrigeration appliance panels. This condensate can cause corrosion on external appliance panels. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
*INSTALLATION* Installation Ventilation Risk of fire and damage due to insufficient ventilation. If the refrigeration appliance is not ventilated sufficiently, the compressor will run more frequently and for longer periods. This will result in increased energy consumption and a higher operating temperature for the compressor. This may, in turn, cause damage to the compressor. Please ensure that there is adequate ventilation around the refrigeration appliance.
*INSTALLATION* Installation Appliance furniture door thickness A [mm] Weight of the furniture door Gap X [mm] for different edge radiiB R0 ≥16–19 R1.2 R2 If the furniture door panel is too R3 min. 3 20 5 4 4 3.5 21 5.5 5 4.5 4 22 6.5 6 5.5 5 heavy, this can cause damage. Fitting a furniture door panel which is heavier than the maximum permitted weight could damage the hinges. This can cause subsequent functional problems.
*INSTALLATION* Installation Building-in dimensions Installation in a tall unit/side view All dimensions are given in mm. * The declared energy consumption was calculated in a 560 mm deep niche. The refrigeration appliance is fully functional in a 550 mm niche but the energy consumption will be slightly higher. Before installation, ensure the housing unit dimensions are the correct size.
*INSTALLATION* Installation Connections and ventilation All dimensions are given in mm. The specified ventilation cross-sections must be adhered to in order to ensure the correct functioning of the refrigeration appliance. a View from the front b Mains connection cable, length 2200 mm. A longer connection cable is available to order from the Miele Customer Service Department. c Ventilation cross-section min.
*INSTALLATION* Installation Limiting the opening angle of the appliance door The door hinges are set ex works to enable the appliance door to be opened wide. However if the opening angle of the appliance door needs to be limited for any reason, the hinge can be adjusted to accommodate this. If the appliance door hits an adjacent wall when opened, for example, the opening angle can be limited to approx.
*INSTALLATION* Installation Electrical connection The refrigeration appliance must only be connected to an earthed socket using the connection cable supplied. The socket must be easily accessible after the refrigeration appliance has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
*INSTALLATION* Installation Connecting the refrigeration appliance Insert the plug connector into the socket at the back of the refrigeration appliance. Make sure that the plug connector has clicked into position correctly. Insert the plug of the refrigeration appliance into the socket. The refrigeration appliance is now connected to the electricity supply.
Saving energy How to save energy: Installation site The refrigeration appliance has to cool more often at higher ambient temperatures and consumes more energy in the process. Therefore, you should: - Install the refrigeration appliance in a well-ventilated room. - Do not install the refrigeration appliance near to a heat source (heater element, cooker). - Protect the refrigeration appliance from direct sunlight. - Ensure an ideal ambient temperature of 20 °C.
Guide to the appliance 26
Guide to the appliance a Display b Fan with lighting c Adjustable shelf with lighting (FlexiLight 2.
Guide to the appliance Start display The touch display can be scratched by pointed or sharp objects, e.g. pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react.
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Function Factory default Switch the Party mode function on or off (see “Selecting further settings”) Off Switch the Holiday mode function on or off (see “Selecting further settings”) Off / Switch the system lock on or off (see “Selecting further settings”) (off) Switch the Sabbath mode function on or off (see “Selecting further setti
Guide to the appliance Switch the Demo mode function off (only visible when switched on) (see “Selecting further settings”) Off Reset to default settings (see “Selecting further settings”) –– Call up information (model designation and serial number) about your refrigeration appliance (see “Selecting further settings”) –– Switch on the reminder to change the charcoal filter (see “Optional accessories”) (see “Selecting further settings”) Off Switch Cleaning mode on or off (see “Cleaning
Guide to the appliance Adjusting the interior fittings Using the door shelf fine adjustment Press the grey buttons at the same time and slide the door shelf up and off the guide rails. Use the fine adjustment if you need greater height clearance on the door shelf/bottle shelf. You can change the height of the door shelf while it is loaded. Remove the guide rail from the lugs and move it to the desired position. Move the second guide rail parallel to the first rail.
Guide to the appliance Clipping the egg trays on Clip the egg trays onto the rear edge of the door shelf. Adjusting or removing the bottle holder Moving the adjustable shelf/adjustable shelf with lighting The shelves can be adjusted according to the height of the food. The non-slip fins of the bottle holder make bottles more secure when you open and close the appliance door. Raise the shelf slightly at the front and pull it forwards a little.
Guide to the appliance Space for a baking tray Moving the bottle rack A baking tray can be placed above the drawers. The baking tray can be no more than 466 mm wide, 386 mm deep and 50 mm high. Open the appliance door as far as it will go. The bottle rack can be placed at different positions in the refrigeration appliance. Place the baking tray on the dividing plate. Tip: Let the baking tray cool down to room temperature before putting it in the refrigerator section.
Guide to the appliance Moving the charcoal filters KKF-FS charcoal filters with holder (Active AirClean) are available as optional accessories (see “Optional accessories”). When storing very strong smelling food (e.g. very ripe cheese): - Place the holder with the charcoal filters on the shelf where this food is kept. - Change the filters sooner if necessary. - Use more charcoal filters (with holders) in the refrigeration appliance.
Guide to the appliance Bottle rack For a description, see “Guide to the appliance – Adjusting the interior fittings”. Adjustable shelf with pivotable glass shelf (FlexiTray) The pivotable glass shelf can be turned 180° clockwise, improving access to the food placed at the back. Organisation box The organisation box makes it easier to sort the food in the fridge zone drawer in a clear manner. Depending on the model, you may need to remove the entire drawer to insert and remove the organisation box.
Switching on and off Before using for the first time Remove all packaging material and protective film. Clean the inside of the appliance and the accessories (see “Cleaning and care”). Connecting the refrigeration appliance Connect the refrigeration appliance to the electricity supply as described in “Electrical connection”. will then appear on the appliance display, followed by . Miele Switching the refrigeration appliance on Open the appliance door. Tap on the display.
Switching on and off Switching off for longer periods of time If, during a long absence, the refrigeration appliance is switched off but not cleaned and the door is left shut, there is a danger of mould building up inside the appliance. It is essential to clean the refrigeration appliance. If the refrigeration appliance is not going to be used for a longer period of time, observe the following: Switch the refrigeration appliance off.
The correct temperature It is very important to set the correct temperature to ensure the shelf life of food. Reducing the temperature reduces the growth rate of microorganisms. Food does not spoil as quickly. The temperature in the refrigeration appliance will rise: - The more often the appliance door is opened and the longer it is kept open - The more food that is stored in it - The warmer the food is which is being put into it - The higher the ambient temperature surrounding the refrigeration appliance.
The correct temperature Setting the temperature Touch the temperature display on the display. Swipe left or right until the temperature you want is shown in the middle. Tap on the temperature you want to confirm. The temperature display will then change back to the current temperature in the refrigeration appliance. Possible temperature settings - Fridge zone: 2 to 9 °C If you change the temperature setting: check the temperature display after a few hours.
Using Super cool and DynaCool SuperCool When switched on, the SuperCool function can be used to rapidly reduce the temperature in the fridge zone to its lowest setting (depending on the ambient temperature). The refrigeration appliance will work at full power and lower the temperature. Select this function for the rapid chilling of large amounts of fresh food or drink. When the SuperCool function is switched on, the appliance may make more noise than usual.
Using Super cool and DynaCool DynaCool When the DynaCool function is not switched on, the natural circulation of air in the appliance will cause different temperature zones in the fridge zone, as the cold, heavy air will sink to the lowest section of the appliance. You should bear this in mind when placing food in the appliance (see “Storing food in the refrigerator section”). However, if you are storing a large amount of similar food in the refrigerator at any one time, e.g.
Selecting further settings Explanation of the different settings Only the settings that require further explanation are described below. The door alarm and other warnings are automatically suppressed when you are in Settings mode . Party mode The Party mode function is particularly recommended for the rapid chilling of large amounts of fresh food or drink. Tip: Switch on the Party mode function approx. 4 hours before placing food and drinks in the appliance.
Selecting further settings Switching the lock function / on Sabbath mode When the lock function is switched on, it protects the refrigeration appliance from being switched off unintentionally and being adjusted unintentionally by unauthorised persons, e.g. children. The refrigeration appliance offers a Sabbath mode for the purposes of religious observance. Tap . Swipe left or right until is shown in the middle. Tap . When the lock function is switched on, will light up orange.
Selecting further settings Health risk caused by decomposing food. As power failures are not indicated while Sabbath mode is active, food may be exposed to increased temperatures for a certain period of time. This will reduce the storage life of the food. If there is a power failure during Sabbath mode , check the quality of the food. Changing the time before the door alarm is triggered You can set how quickly the door alarm should sound after an appliance door has been opened. Tap .
Selecting further settings Miele@home Your refrigeration appliance is equipped with an integrated WiFi module. Networking is deactivated at the factory. To use this feature, you will need: - A WiFi network - The Miele app - A Miele user account You can create a user account via the Miele app. The Miele app will guide you as you connect your refrigeration appliance to your home WiFi network. even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed.
Selecting further settings Setting up Miele@home for the first time Deactivating or activating the WiFi connection Tap . Tap . Swipe left or right until is shown in the middle. Swipe left or right until is shown in the middle. Tap . Tap . Tap on the connection method you wish to use (app or WPS). Tap to deactivate the WiFi connection. After you have successfully logged in, will appear on the start display. will appear on the display.
Selecting further settings Reset the network configuration if you are disposing of or selling your refrigeration appliance, or if you are putting a used refrigeration appliance into operation. All personal data is removed from the refrigeration appliance. This will also ensure that a previous owner is no longer able to access the refrigeration appliance. Changing the volume of the alarms and buzzers / You can change the volume of the alarms and buzzers (e.g.
Selecting further settings Resetting the settings to their default settings All settings made on the refrigeration appliance will be reset to default settings (for settings, see “Guide to the appliance”). Tap . Swipe left or right until is shown in the middle. Tap . will appear on the display. Tap OK. The refrigeration appliance shuts down and must be switched on again. Information Appliance data (model number and serial number) is shown on the display.
Door alarm The refrigeration appliance is fitted with a warning system to avoid increased energy consumption and food becoming warm if the appliance door is left open. If the appliance door is left open for a longer period of time, will light up yellow in the temperature display. An alarm will also sound. You can change the time before the door alarm is triggered. However, the door alarm can also be turned off (see “Selecting further settings”).
Storing food in the refrigerator section Risk of explosion due to flam- Different storage zones mable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store explosive materials in the refrigeration appliance or any products containing propellants (e.g. spray cans). The spray cans in question can be identified by the contents printed on the can or by a flame symbol. Electrical components can cause escaping gases to ignite.
Storing food in the refrigerator section Coldest area The coldest area in the fridge zone is directly above the DailyFresh drawer and at the back of the appliance.
Storing food in the refrigerator section Storing food correctly Ensure that food stored in the fridge zone is in packaging or covered properly (some exceptions apply in the DailyFresh drawer). This will prevent food odours from affecting other food, stop food from drying out and also prevent any cross-contamination of bacteria. This is particularly important when storing meat products. Make sure that food such as raw meat and fish in particular does not come into contact with other food.
Storing food in the DailyFresh drawer The DailyFresh drawers provide good storage conditions for fruit and vegetables. The humidity level in the upper DailyFresh drawer can also be regulated to suit the food being stored. Food retains its own moisture if stored at a higher humidity and so does not dry out as quickly. The temperature is approximately equivalent to the temperature in the fridge zone. Selecting low humidity By default, the humidity is increased and the compartment cover pushed backwards .
Storing food in the DailyFresh drawer Observe the following tips if you find that food you have stored does not keep well (e.g. food becomes limp or wilts after only being stored for a short time): Only place fresh food in the appliance. The initial condition of the food is crucial to maintaining freshness. Clean the DailyFresh drawer before storing food in it. Very wet food should be dried off before storing it.
Defrosting Fridge zone and DailyFresh drawer The fridge zone and the DailyFresh drawer defrost automatically. Condensate and frost can build up on the back wall of the fridge zone and the DailyFresh drawer whilst the compressor is running. You do not need to remove this. The condensate drains through a channel and drain hole into an evaporation system at the back of the refrigeration appliance. The warmth generated by the compressor causes the condensate to evaporate automatically.
Cleaning and care The data plate located inside the interior cabinet of the refrigeration appliance must not be removed. It contains information which is required in the event of a fault. Do not let water get into the electronic unit or the lighting. Risk of damage due to moisture ingress. The steam from a steam cleaner can damage plastic and electrical components. Do not use a steam cleaner to clean the refrigeration appliance. Cleaning water must not get into the drain hole.
Cleaning and care Preparing the refrigeration appliance for cleaning Cleaning the inside of the appliance Tip: Switch Cleaning mode on. The cooling in the fridge zone is switched off, but the interior lighting remains switched on. The refrigeration appliance should be cleaned regularly (at least once a month). Tap . If soiling is left on for any length of time, it may become impossible to remove under certain circumstances. Surfaces may suffer discolouration or damage.
Cleaning and care Cleaning accessories by hand or in the dishwasher The following components must be cleaned by hand only: - The stainless steel trims or strips - Flexible bottle rack - Door shelf with fine adjustment - Protective strips at the back of the adjustable shelves - Adjustable shelf with printing - All drawers and compartment lids (these vary depending on model) - The plastic parts of the adjustable shelf with pivotable glass shelf (available as optional accessory) - Shelves and bottle shelves i
Cleaning and care Dismantling the door shelf/bottle shelf Remove the stainless steel trim before cleaning the door shelf/bottle rack in a dishwasher. To remove the stainless steel trim, proceed as follows: Place the door shelf/bottle rack on the worktop. Dismantling the adjustable shelf/adjustable shelf with lighting Risk of damage as a result of incorrect cleaning. The stainless steel trim with LED lighting will be damaged if you place it in water for cleaning.
Cleaning and care Removing the drawers from the fridge zone Pull the drawer out as far as it will go. The drawer is clipped into place at the back. It must be unclipped for removal. Grasp the plastic surround on the left-hand side of the stainless steel trim at its rearmost point. 1. Pull the plastic surround from the adjustable shelf and 2. pull the trim off at the same time. The opposite side will also be released. 3. Then pull the protective strip off.
Cleaning and care Push the drawer firmly into the refrigeration appliance until you hear it click into place. Removing the dividing plate Replacing the charcoal filters (optional accessories) Replace the charcoal filters in the holder every 6 months. The symbol on the start display reminds you that the charcoal filter needs to be changed. Replacement KKF-RF charcoal filters can be obtained from your Miele dealer, Miele or via the internet at www.miele-shop.com. Remove the dividing plate.
Cleaning and care Cleaning the door seal Risk of damage as a result of incorrect cleaning. If you treat the door seal with oils or grease, it can become porous. Do not use any oils or grease on the door seal. Place the holder in the middle of the protective strip at the back of any adjustable shelf so that it clicks into position. Touch the symbol on the start display to confirm that you have changed the charcoal filters.
Cleaning and care After cleaning Switch the Cleaning mode function off again by tapping on on the start display. Tap again. When Cleaning mode is switched off, the symbol will light up white. The refrigeration appliance will start cooling again. Replace all shelves and accessories in the refrigeration appliance. Switch on the SuperCool function for a while so that the temperature inside the refrigeration appliance will drop quickly.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. To prevent unnecessary loss of temperature it is advisable not to open the door while waiting for the appliance to be serviced.
Problem solving guide Problem Cause and remedy After a while, the temperature will return to normal by itself. The ambient temperature is too high. The higher the ambient temperature, the longer the compressor runs. See the information in “Installation – Installation site”. The refrigeration appliance was not properly installed in the niche. Install the refrigeration appliance in the niche as described in the installation instructions supplied with it.
Problem solving guide Other problems Problem Cause and remedy The floor of the refriger- The condensate drain hole is blocked. ator section is wet. Clean the condensate channel and drain hole. There is no audible alarm even though the door has been open for a long time. This is not a fault. The alarm has been switched off in Settings mode. If you want to switch the acoustic alarm back on again: Tap . Swipe left or right until is shown in the middle. Tap .
Problem solving guide Display warnings Message Cause and remedy lights up on the start display, the refrigeration appliance does not get cold even though the controls and the interior lighting are working. Demo mode has been activated. Tap . Tap . Swipe left or right until is shown in the middle. Tap . is lit up on the display and the appliance cannot be used. The Cleaning mode function is still switched on.
Problem solving guide Message Cause and remedy The symbol lights up The charcoal filter change indicator on the start on the start display and display reminds you that the charcoal filter needs to a buzzer also sounds. be changed. Replace the charcoal filter in the holder (see “Cleaning and care – Replacing the charcoal filters (optional accessories)”) and touch the symbol on the display to confirm that you have changed the charcoal filter. The symbol will go out on the start display.
Problem solving guide The interior lighting is not working Risk of electric shock due to exposed, live electrical components. When removing the lighting cover, there is a risk of coming into contact with live electrical components. Do not remove the lighting cover. The LED lighting may only be repaired or replaced by the Miele Customer Service Department. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury.
Problem solving guide Problem Cause and remedy The LED lighting on one The shelf has not been positioned correctly on the of the adjustable shelf supports. shelves is not working. Check that the shelf is positioned correctly on the shelf supports. The shelf has metal contacts at the front left corner which supply power to the LED lighting. Push the shelf in until it clicks into position. The LED lighting on the stainless steel trim is faulty. Replace the stainless steel trim with LED lighting.
Noises Normal noises What causes them Brrrrr ... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blubb, blubb ... A gurgling noise can be heard when coolant is circulating through the pipes. Click ... Clicking sounds are made when the thermostat switches the motor on and off. Crack ... A cracking sound can be heard when materials expand inside the appliance.
Service Contact in the event of a fault EPREL database In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. From 1 March 2021, information on energy labelling and ecodesign requirements will be available in the European Product Database (EPREL). You can find the product database at the following link https://eprel.ec.europa.eu/. You will be asked to enter the model identifier.
EU Conformity declaration Miele hereby declares that this refrigerator complies with Directive 2014/53/ EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.uk/domestic/customer-information-385.htm and enter the name of the product or the serial number Frequency band of the WiFi module 2.4000 GHz – 2.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.
K 7763 E en-GB M.-Nr.
