Installation Instructions 30" Electric, 30" Induction Range 30", 36" All Gas Range 30", 36", 48" Dual Fuel Range To prevent accidents and damage to the range, you must read all instructions supplied before installing or using the appliance. en–US, CA M.-Nr.
IMPORTANT SAFETY INSTRUCTIONS WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. This range must be secured and connected using the anti-tip device according to the installation instructions. If you have moved the range, slide the locking latch onto the antitip device until you feel it lock into place. Do not use the range if the anti-tip device has not been properly installed and engaged.
IMPORTANT SAFETY INSTRUCTIONS WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death. – Do not use or store gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS – Do not try to light any appliance. – Do not touch any electric switches. – Do not use any phones inside your building. – Immediately call your gas supplier from a neighbor's phone.
Contents IMPORTANT SAFETY INSTRUCTIONS................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS................................................................. 6 Notes on installation ............................................................................................ 13 Model numbers ..................................................................................................... 13 Data plate .............................................................
Contents Installation dimensions of locking bolt................................................................... 68 Installing the range with the anti-tip device ........................................................... 68 Disconnecting the range from the anti-tip device.................................................. 71 Electrical connection ........................................................................................... 72 Data plate.......................................................
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the range to prevent accidents and machine damage. This range complies with current safety requirements. However, improper use of the appliance can result in personal injury or damage to property. Please read the installation instructions carefully before installing and connecting the appliance.
IMPORTANT SAFETY INSTRUCTIONS Use This range is intended for domestic use and use in other similar environments. This appliance is not intended for outdoor use. Use the range exclusively under normal domestic conditions: – Use the oven for baking, roasting, broiling, defrosting, canning and drying food. – Use the stovetop to prepare food and keep it warm. Any other use is not permitted. Risk of Fire! Do not use this oven to store or dry flammable materials.
IMPORTANT SAFETY INSTRUCTIONS Burn hazard! Keep the spaces above and behind the range clear of any items that could draw the attention of children. Otherwise, they can be tempted into climbing onto the appliance. Danger of injury. Never allow children to hang or lean on any part of the appliance.
IMPORTANT SAFETY INSTRUCTIONS A damaged range can be dangerous. Always check for visible signs of damage. Never use a damaged appliance. Reliable and safe operation of the range can only be guaranteed if it is connected to the public power supply. The electrical safety of the range can only be guaranteed when it is properly grounded. Compliance with this essential safety requirement is absolutely mandatory.
IMPORTANT SAFETY INSTRUCTIONS This appliance must not be installed and operated in mobile installations (e.g. on a ship). Any repairs not performed by a Miele authorized service technician will void the warranty. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.
IMPORTANT SAFETY INSTRUCTIONS – The range is repaired immediately whenever damage is detected. – The water supply is shut off during extended periods of non-use (e.g. vacation). Hard water, water containing minerals and water from reverse osmosis filtering systems can damage the range. Only use filtered, softened and demineralized water from the building's plumbing to supply the range.
IMPORTANT SAFETY INSTRUCTIONS Debris should be removed before running the Self Clean program. If not removed this debris can smoke causing the self-cleaning program to turn itself off.
Notes on installation Model numbers Items included with this range A list of the ovens described in these operating instructions can be found on the back page. The range is supplied with: Data plate – Installation Instructions, – Multiple operating instructions (depending on model) for: The data plate is behind the toe-kick. The toe-kick cover is attached to the base of the range by magnets so it can be removed and put back again easily.
Notes on installation Toe-kick and drop guard 30" and 36" range The components are located in the packaging of the range. 48" range The components are already mounted. Installation of the drop guard The drop guard covers the gap between the oven cavity and the door. Open the oven door. Installation of the toe-kick The toe-kick has sheet metal lugs and magnets by means of which it can be positioned and attached to the base of the range.
Notes on installation Optional accessories All accessories and cleaning products listed in these instructions are designed to be used with the Miele range. These can be ordered from the Miele website (see end of this booklet for contact details). When ordering, please have your model number available. RBGAG All Gas Backguard/RBGDF Dual Fuel Backguard Depending on the model, you can exchange the existing island trim of your appliance for a larger range backguard.
Notes on installation 1 12" Backguard 2 a Backguard b Range Slide the Backguard over the air duct extenders. 20" Backguard Once the backguard is placed on the Range push the Backguard backwards. Secure the Backguard using the existing screws.
Notes on installation RBS Backsplash The backsplash is intended for mounting to a Miele range hood. Observe the installation instructions of the Miele range hood. XKM 3000 W Remote Vision Depending on the model, the range maybe compatible with RemoteVisionTM. In order to use the RemoteVisionTM monitoring service, you will require a XKM 3000 W Communication Module. Refer to the Operating and Installation Instructions of the Miele XKM 3000 W Communication Module.
Notes on installation Do not carry or lift the range by the oven door handle or the control panel! The range is heavy. Due to the size and weight of the appliance, installation should be performed by two people. The net weight of the range with accessories is as follows: Model Width Net weight incl. accessories: HR 1421 HR 1622 HR 112x HR 192x 30" (762 mm) approx. 307 lbs (140 kg) HR 113x HR 193x 36" (914 mm) approx. 405 lbs (180 kg) HR 195x 48" (1219 mm) approx.
Notes on installation Installation location This appliance is not intended for outdoor use. Ranges with a connection to the water supply should not be installed in rooms where there is a risk of freezing temperatures. The floor of the space where the appliance is to be installed must be flat, level and made of a strong, rigid material. Because the range is heavy and requires attachment of the anti-tip device supplied, the surface must be able to fully bear the load of the appliance.
Electric Range dimensions HR 1421; HR 1622 1 20
Electric Range dimensions HR 1421; HR 1622 Position Dimension 13" (330 mm) Maximum depth of top cabinet 6" (152 mm) Minimum distance (left and right) to flammable surfaces 18" (547 mm) Minimum distance to bottom edge of top cabinet 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected wooden or metal cabinet or 24" (609 mm) Minimum distance if the bottom of the wooden or metal cabinet is not protected by less than 1/4inch-thick, flame-retar
Electric Range dimensions Detailed views of HR 1421 Side view of HR 1421 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 24 15/16" (633mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Electric Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1421 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Electric Range dimensions 30 5/8" (778.5mm) Rear view of HR 1421 E E = Electrical connection 24 24 3 (619 /8" .
Electric Range dimensions Detailed views of HR 1622 Side view of HR 1622 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 24 15/16" (633mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Electric Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1622 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Electric Range dimensions 5 7/8" (149mm) Rear view of HR 1622 30 5/8" (778.5mm) W 3 1/4 E 24 3 (619 (81.8 " mm) /8" .
All Gas Range dimensions HR 1124, HR 1134, HR 1135, HR 1136 1 Position Dimension 13" (330 mm) Maximum depth of top cabinet 6" (152 mm) Minimum distance (left and right) to flammable surfaces 18" (457 mm) Minimum distance to bottom edge of top cabinet 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected wooden or metal cabinet 35 1/2"–37" (901 - 940 mm) 28 Description Distance from floor to cooktop surface
All Gas Range dimensions HR 1124 Position Dimension 30 1/16“ + 1/16" Width of cabinet opening (763.6 mm + 1.58 mm) approx. 10 13/16" (274 mm) approx. 4 1/2" (115 mm) Description Maximum connection width right and left Maximum connection height approx. 2 13/16" Maximum connection depth (72 mm) HHR 1134, HR 1135, HR 1136 Position Dimension Description 36 1/16“ + 1/16" Width of cabinet opening (916 mm + 1.58 mm) approx.
All Gas Range dimensions Detailed views of HR 1124 Side view of HR 1124 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1124 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Rear view of HR 1124 30 5/8" (778.5mm) G E E = Electrical connection G = Gas connection 32 24 3 (619 2 15 (75.4 /8" /16" .
All Gas Range dimensions Detailed views of HR 1134 Side view of HR 1134 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1134 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Rear view of HR 1134 30 5/8" (778.5mm) G 27 3 E /8" (6 96.1 m m) 33 (94.
All Gas Range dimensions Detailed views of HR 1135 Side view of HR 1135 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1135 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Rear view of HR 1135 30 5/8" (778.5mm) G 27 3 E E = Electrical connection G = Gas connection 38 /8" (6 96.1 m m) 33 (94.
All Gas Range dimensions Detailed views of HR 1136 Side view of HR 1136 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
All Gas Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1136 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions Rear view of HR 1136 30 5/8" (778.5mm) G 27 3 E /8" (6 96.1 m m) 33 (94.
Dual Fuel Range dimensions HR 1924, HR 1934, HR 1935, HR 1936, HR 1954, HR 1955, HR 1956 1 Position Dimension 13" (330 mm) Maximum depth of top cabinet 6" (152 mm) Minimum distance (left and right) to flammable surfaces 18" (457 mm) Minimum distance to bottom edge of top cabinet 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected wooden or metal cabinet 35 1/2"–37" (901 - 940 mm) 42 Description Distance from floor to cooktop surfac
Dual Fuel Range dimensions HR 1924 Position Dimension 30 1/16“ + 1/16" Width of cabinet opening (763.6 mm + 1.58 mm) approx. 10 13/16" (274 mm) approx. 4 1/2" (115 mm) Description Maximum connection width right and left Maximum connection height approx. 2 13/16" Maximum connection depth (72 mm) HR 1934, HR 1935, HR 1936 Position Dimension Description 36 1/16“ + 1/16" Width of cabinet opening (916 mm + 1.58 mm) approx.
Dual Fuel Range dimensions HR 1954, HR 1955, HR 1956 Position Dimension Description 48 1/16“ + 1/16" Width of cabinet opening (1220.8 mm + 1.58 mm) approx. 20 1/2" (518 mm) Maximum connection width right and left approx. 3 1/2" (90 mm) Maximum connection height approx. 2 13/16" Maximum connection depth (72 mm) The gray areas represent the minimum distance from flammable surfaces. The hatched areas represent the installation areas for the connections.
Dual Fuel Range dimensions Detailed views of HR 1924 Side view of HR 1924 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1924 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions 5 7/8" (149mm) Rear view of HR 1924 G 30 5/8" (778.5mm) W E 5 15 (151 /16" 24 3 (619 .3mm ) /8" 2 15 (75.4 /16" mm) .
Dual Fuel Range dimensions Detailed views of HR 1934 Side view of HR 1934 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1934 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions 6 1/16" (153.8mm) Rear view of HR 1934 W 30 5/8" (778.5mm) G E 33 27 3 61 /8" (6 96.1 m m) E = Electrical connection W = Water connection G = Gas connection 50 (158 /4" mm) (94.
Dual Fuel Range dimensions Detailed views of HR 1935 Side view of HR 1935 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1935 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions 6 1/16" (153.8mm) Rear view of HR 1935 W 30 5/8" (778.5mm) G E 33 27 3 61 /8" (6 96.1 m m) (158 /4" mm) (94.
Dual Fuel Range dimensions Detailed views of HR 1936 Side view of HR 1936 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1936 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions 6 1/16" (153.8mm) Rear view of HR 1936 W 30 5/8" (778.5mm) G E 33 27 3 61 /8" (6 96.1 m m) E = Electrical connection W = Water connection G = Gas connection 56 (158 /4" mm) (94.
Dual Fuel Range dimensions Detailed views of HR 1954 Side view of HR 1954 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1954 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Rear view of HR 1954 E 23 1 40 7 (102 (590 /16" /4" .7mm ) (805mm) 31 11/16" 5 9/16" G (140.8mm) W 3 3/ (95.7 4" mm) 7.
Dual Fuel Range dimensions Detailed views of HR 1955 Side view of HR 1955 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1955 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Rear view of HR 1955 E 40 7 (102 E = Electrical connection W = Water connection G = Gas connection 62 23 1 /4 (590 /16" 7.7m m) " .7mm ) 3 3/ (95.7 4" mm) (805mm) 31 11/16" 5 9/16" G (140.
Dual Fuel Range dimensions Detailed views of HR 1956 Side view of HR 1956 47 5/8" (1210mm) 24 15/16" (633mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.7 - 979.8mm) 1 3/4" (45mm) 8 1/8" (207mm) 27 1/4" (692mm) 1 9/16" (40mm) 28 15/16" (734.4mm) (x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm 139.
Dual Fuel Range dimensions 10 15/16" (278mm) 1/8" (3mm) 9 1/4" (235mm) 1 9/16" (40mm) 8 1/8" (207mm) 2 3/8" (60mm) 1 9/16" (40mm) Detailed front side view of HR 1956 1 1/4" (32mm) 1 3/4" (45mm) 2 9/16" (65.
Dual Fuel Range dimensions Rear view of HR 1956 E 40 7 (102 23 1 /4 (590 /16" " .7mm ) (805mm) 31 11/16" 5 9/16" G (140.8mm) W 3 3/ (95.7 4" mm) 7.
Anti-tip device Before installation WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. Make sure that the anti-tip device is properly installed and locked into place. It should be screwed to the floor or wall and engage with the center of the bottom of the range. You must take care to protect the installed flooring when moving the range. After moving the range, make sure that the anti-tip device locks back into place.
Anti-tip device Checking the installation space Install the anti-tip device on the floor, concrete wall or timber framing. The surface must be flat and level. Included accessories – 1 anti-tip device – 4 screws – 4 plugs Check the base surface. Check the installation dimensions. Check the diagrams for the building's supply lines. Make sure that you do not damage any lines when drilling the holes to attach the anti-tip device.
Anti-tip device Installation dimensions of locking bolt Installing the range with the anti-tip device X Wear safety shoes and gloves. Anti-tip device, front view Model Width X HR 1421 HR 1622 HR 112x HR 192x 30" (762 mm) 3 13/16" (97 mm) HR 113x HR 193x 36" (914 mm) 3 13/16" (97 mm) HR 195x 48" (1219 mm) 3 1/4" (82 mm) 68 The anti-tip device should be installed at the bottom rear of the range at the midpoint of the width.
Anti-tip device 2 Do not push the range into position until all the utility connections have been made. The toe-kick cover is attached to the base of the range by magnets. 1 3 Attaching to the floor 3 2 1 Attaching to the wall a Anti-tip device b Screws c Locking nut Secure the anti-tip device to the floor surface with suitable bearing capacity, either to the floor or wall. using four screws . Screw the locking nut to the bolt, see the "Installation dimensions of locking bolt" table.
Anti-tip device Complete all necessary connections for the range. Read the information in the "Electrical connection", "Gas connection" and "Plumbing" sections. The range can be damaged if it is lifted using the cover, the trim or the door handle. Open the oven door and hold the appliance by the front of the oven interior. Lift the range and move it with the help of the rear wheels. Use a level to align the range – Left and right rear adjustment : You will need a 3/8" (10 mm) open-end wrench.
Anti-tip device In the range housing, there is an opening for the bolt of the anti-tip device. The opening allows the range to be slid onto the anti-tip device and back to the wall. The locking clamp must noticeably engage with the bolt so that anti-tip protection is ensured for the range. 1 2 Disconnecting the range from the anti-tip device WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries.
Electrical connection CAUTION: During installation, maintenance and repair work, the range must be disconnected from the electricity supply. It is only completely isolated from the electricity supply if the plug fuses have been fully unscrewed (where applicable), the main circuit breaker has been tripped or the power cable has been unplugged from the wall outlet. Installation, repair and maintenance work should only be performed by a Miele authorized service technician.
Electrical connection Electrical connection Type Connecting line NEMA Electrical supply HR 1421 approx. 71" (1.80 m) 14-50 P plug 120/208 V 50 A 60 Hz HR 1421 approx. 71" (1.80 m) 14-50 P plug 120/240 V 50 A 60 Hz HR 1622 HR 195x approx. 71" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 60 Hz HR 192x HR 193x approx. 71" (1.80 m) 14-30 P plug 120/208 V or 120/240 V 30 A 60 Hz HR 112x HR 113x approx. 71" 5-15 P plug (1.
Electrical connection This appliance must be grounded in compliance with all applicable local and national regulations. Installation, repair and maintenance work should only be performed by a Miele authorized service technician in compliance with local regulations and the ANSI National Electrical Code / NFPA 70 in the United States or the Canadian Electrical Code, Part I in Canada (CSA standard C22.1).
Plumbing Notes on connecting to the water supply Disconnect the appliance from the electrical power supply before connecting the water line. Turn off the water supply before connecting the water lines for the range. – All devices used for connecting the appliance to the water supply must comply with the current national and local safety regulations in the country in which the range is being installed. – We do not recommend the use of water produced by Reverse Osmosis filtration systems.
Plumbing Attach the stainless steel hose to the range. Make sure that the stainless steel hose is not kinked or damaged. The stainless steel hose must not be shortened. Remove the cover from the water supply connection at the back of the range. Connecting to the water supply Danger of electric shock! Disconnect the range from the electrical supply before connecting it to the water supply. Check that the gasket is present. Replace, if not, insert before connecting to the water supply.
Gas connection Connection to the gas supply and any switchover to a different gas type may only be performed by a duly authorized gas company technician. This technician is responsible for proper function at the installation site. In Massachusetts, the gas connection may be performed only by a certified gas installer. The range must be connected with its own shut-off valve. The gas connection must be arranged in such a way that connection is possible inside or outside of the kitchen cabinets.
Gas connection The gas connection must be established only Miele-authorized specialists according to the local and following regulations: National Fuel Gas Code ANSI Z 21.1 / NFPA No. 54 for the United States or the current Can / CGA B 149.1 and 2 Installation Codes of Gas Appliances for Canada. The gas pressure may not undershoot or exceed certain values. Make sure that the maximum gas pressure upstream of the gas pressure controller does not amount to more than 1/2 psi (3.
Converting to another gas type The gas connection of the range depends upon the model of the range. If the range is not configured for the proper type of gas connection please contact your Miele dealer. If the range has to be converted over to another gas type, all jets must be exchanged. A conversion kit is available as an optional accessory from the Miele Technical Service Department.
Burner ratings Burner rating gas cooktops Burner rating of HR 1124 Gas type BTU/hr kW min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.65 Power burner Natural gas 1,700 19,500 0.50 5.70 Propane gas 1,200 19,500 0.35 5.70 Total output Natural gas Propane gas 71,000 20.75 71,000 20.75 BTU/hr kW Burner rating of HR 1134 Gas type min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.
Burner ratings Burner rating of HR 1135 Gas type BTU/hr kW min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.65 Power burner Natural gas 1,700 19,500 0.50 5.70 Propane gas 1,200 19,500 0.35 5.70 Grill Natural gas 12,000 16,000 3.50 4,70 Propane gas 12,000 15,000 3.50 4.40 Total output Natural gas Propane gas 87,000 25.45 86,000 25.
Burner ratings Burner rating of HR 1924 Gas type BTU/hr kW min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.65 Power burner Natural gas 1,700 19,500 0.50 5.70 Propane gas 1,200 19,500 0.35 5.70 Total output Natural gas Propane gas 71,000 20.75 71,000 20.75 BTU/hr kW Burner rating of HR 1934 Gas type min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.
Burner ratings Burner rating of HR 1935 Gas type BTU/hr kW min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.65 Power burner Natural gas 1,700 19,500 0.50 5.70 Propane gas 1,200 19,500 0.35 5.70 Grill Natural gas 12,000 16,000 3.50 4,70 Propane gas 12,000 15,000 3.50 4.40 Total output Natural gas Propane gas 87,000 25.45 86,000 25.
Burner ratings Burner rating of HR 1954 Gas type BTU/hr kW min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.65 Power burner Natural gas 1,700 19,500 0.50 5.70 Propane gas 1,200 19,500 0.35 5.70 Total output Natural gas Propane gas 142,000 41.50 142,000 41.50 BTU/hr kW Burner rating of HR 1955 Gas type min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.
Burner ratings Burner rating of HR 1956 Gas type BTU/hr kW min max min max Simmer burner Natural gas 1,200 12,500 0.35 3.65 Propane gas 950 12,500 0.28 3.65 Power burner Natural gas 1,700 19,500 0.50 5.70 Propane gas 1,200 19,500 0.35 5.70 Griddle Natural gas 15,000 4.40 Propane gas 15,000 4.40 118,000 34.50 118,000 34.
Burner ratings Burner rating gas ovens Burner rating of HR 1124 Gas type BTU/hr kW Top heat burner Natural gas 22,500 6.59 Propane gas 20,150 5.90 Bottom heat burner Natural gas 23,200 6.79 Propane gas 23,200 6.79 Burner rating of HR 1134, HR 1135, HR 1136 Gas type BTU/hr kW Top heat burner Natural gas 22,500 6.59 Propane gas 20,150 5.90 Bottom heat burner Natural gas 25,500 7.47 Propane gas 27,000 7.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Old electrical and electronic appliances often still contain valuable materials.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
All Electric: HR1421; HR1622; All Gas: HR1124; HR1134; HR1135; HR1136; Dual Fuel: HR1924; HR1934; HR1935; HR1936; HR1954; HR1955; HR1956 en–US, CA M.-Nr.
