Operation Manual

Please note that the Miele|home and
SuperVision system is currently only
available in selected countries.
This appliance a/c is network enabled
and can be connected to the
Miele|home system via a
communication module or
communication stick b and a
conversion kit where required.
The Miele|home enables network
enabled appliances to send information
via the household wiring network to a
master appliance c such as an oven
with SuperVision functionality, about
their operational status, as well as
information about the progress of the
programme.
Displaying information and
controlling appliances
– SuperVision master appliance c
The status of other signed on
appliances can be shown in the
display of some communication
enabled appliances.
– Mobile appliance g
A PC, Notebook, Tablet PC or a
Smartphone can be used within the
reception area of a household WLAN
e to display status information about
signed on appliances and carry out
certain functions.
– Household network f
The Miele|home system enables
smart living. The Miele|home
Gateway d allows other network
enabled appliances to integrate into
the household bus system.
In Germany, network enabled
appliances can be integrated into
the QIVICON Smart Home Platform
instead of the Miele|home Gateway
(www.qivicon.de).
SmartStart (depending on household
appliance)
Smart grid enabled appliances can be
started automatically at a time when
electricity costs are favourable or when
a sufficient supply of electricity is
available (e.g. from a solar power
system).
Optional accessories (depending on
household appliance)
– Communication module XKM3000Z
or communication stick XKS3000Z
– Conversion kit for communication
system XKV
– Miele|home Gateway XGW3000
These accessories are supplied with
their own installation and operating
instructions.
Further information
Further information regarding
Miele|home is available on the internet
and in the instruction manuals of the
various Miele|home components.
Miele|home
149