Operation Manual

Test food acc. to EN 60350
Test food Tray / tin Function 6
[°C]
³ +
[min]
Pre-hea
t
Drop cookies
(8.4.1)
1 tray U 140
2)
2 30–50 No
2 trays
1)
U 140
2)
1+2 30–50 No
1 tray V 160
2)
2 15–30 Yes
Small cakes
(8.4.2)
1 tray U 150
2)
2 25–35 No
2 trays U 140
2)
1+2 25–30 Yes
1 tray V 160
2) 6)
2 20–30 Yes
Whisked
sponge cake
(8.5.1)
Springform C 26 cm
3)
U 185
2)
2 22–30 No
Springform C 26 cm
3)4)
V 150–180
2) 6)
2 20–45 Yes
Apple pie
(8.5.2)
Springform C 20 cm
3)
U 160
2)
2 80–105 No
Springform C 20 cm
3)
V 180
2)
1 80–100 No
Toast (9.1) Rack Y 300 2 5–10 No
Grill beef
burgers
(9.2)
Rack on top of universal
tray
Y 300 2 1st side:
10–16
2nd side:
7–12
Yes, 5
minutes
U Fan plus / V Conventional heat / Y Full grill
6 Temperature / ³ Shelf level / + Duration
1) Take the baking trays out of the oven early if the food is sufficiently browned before the specified
time has elapsed.
2) Switch off Rapid heat-up during the heating-up phase. To do this select "Open further settings -
Rapid heat-up - Off".
3) Place baking tins on the rack.
4) In general, if a range of temperatures is given, it is best to select the lower temperature and to
check the food after the shortest time.
5) Select a function and a temperature and then select "Open further settings – Crisp function – On".
6) Switch the catalyser off (see "Settings – Catalyser").
Energy efficiency class
The Energy efficiency class is determined according to EN 50304.
Energy efficiency class A
Function used: U Fan plus
Please note: Do not use the FlexiClip runners.
Switch the catalyser off (see "Settings –
Catalyser").
Note for test institutes
111