Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the oven
- Control panel
- Features
- Model numbers
- Data plate
- Items included
- Standard and optional accessories
- Shelf runners
- Baking tray, Roasting pan and Wire oven rack
- FlexiClip telescopic runners HFC 72
- Installing and removing the FlexiClip telescopic runners
- Perforated Gourmet baking tray HBBL 71
- Grilling and Roasting insert HGBB 71
- Round baking form HBF 27-1
- Gourmet Baking Stone HBS 60
- Gourmet Casserole Dishes HUB and Lids HBD
- Roast Probe
- Opener
- Miele Oven Cleaner
- Oven controls
- Oven safety features
- PerfectClean surfaces
- Self Clean ready accessories
- Before first use
- Settings
- Timer
- Guide to the modes
- Operating the oven
- Additional functions
- MasterChef
- Favorites
- Bake
- Roast
- Slow Roasting
- Broil
- Special Modes
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- Caring for the environment
- Electrical connection
- Installation diagrams
- Installing the oven
Electrical connection
*
I
N
S
T
A
L
L
A
T
I
O
N
*
94
CAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually “tripping” the circuit
breaker.
Installation, repair and maintenance
should be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be inserted into a
suitable outlet that has been installed
and grounded in compliance with all
applicable local regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
Electrical connection
The oven is equipped with a power cord
approx. 5' 6" (1.7 m) in length with a
NEMA 14-30 P plug ready for
connection to the power supply:
– 120/208 V, 20 A, 60 Hz
or
– 120/240 V, 20 A, 60 Hz
The voltage can be adjusted (see
“Settings - Electrical Version”).
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.