Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the oven
- Control panel
- Features
- Model numbers
- Data plate
- Items included
- Standard and optional accessories
- Shelf runners
- Baking tray, Roasting pan and Wire oven rack
- FlexiClip telescopic runners HFC 72
- Installing and removing the FlexiClip telescopic runners
- Perforated Gourmet baking tray HBBL 71
- Grilling and Roasting insert HGBB 71
- Round baking form HBF 27-1
- Gourmet Baking Stone HBS 60
- Gourmet Casserole Dishes HUB and Lids HBD
- Roast Probe
- Opener
- Miele Oven Cleaner
- Oven controls
- Oven safety features
- PerfectClean surfaces
- Self Clean ready accessories
- Before first use
- Settings
- Timer
- Guide to the modes
- Operating the oven
- Additional functions
- MasterChef
- Favorites
- Bake
- Roast
- Slow Roasting
- Broil
- Special Modes
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- Caring for the environment
- Electrical connection
- Installation diagrams
- Installing the oven
Cleaning and care
82
Starting the Self Clean program
Risk of burns!
When Self Cleaning the front of the
oven becomes hotter than with
normal oven use.
Prevent children from touching the
oven during the Self Clean program.
Select Maintenance.
Select Self Clean.
The Self Clean level is highlighted.
Press or to toggle between levels
1, 2 and 3.
Select the level required.
Confirm with OK.
Follow the instructions in the display.
Confirm with OK.
Starting the Self Clean program
To start the Self Clean program
immediately, select Start Now.
The Self Clean program will now start.
The door locks automatically. The oven
heating and the cooling fan will then
turn on automatically.
The oven light will not turn on during
the Self Clean program.
The remaining time for the Self Clean
program appears. The duration cannot
be changed.
You can use the timer while the Self
Clean program is running. At the end of
the timer duration the buzzer will sound
and will flash. The time will then
continue to increase in the display.
As soon as “Timer” is pressed, the
buzzer and the flashing indicator will
turn off.
Delaying the start of the Self Clean
program
To delay the start of the Self Clean
program, select Start Later.
Set the time you would like the
program to start at.
Confirm with OK.
The door will lock automatically. The
start time set will appear in the display.
Start at appears in the display and the
start time set. The start or end time can
be changed up until the program is
ready to start, to do so select Change.
As soon as the start time has been
reached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.