Operating and Installation Instructions

Roast
63
You can also delay the start of the
cooking program to a later time. To do
this, select Start at.
You can estimate approximately when
the food will be ready as the duration of
the cooking program is about the same
as if you were cooking food without
using the roast probe.
Duration and Ready at cannot be set
because the total time depends on how
long it takes for the core temperature to
be reached.
Time-left display
If the temperature set for a cooking
process is above 285°F (140°C), the
estimated duration remaining (time left)
will appear in the display.
The time left is calculated from the
cooking temperature selected, the set
core temperature, and the progress of
the core temperature as it rises.
The time left first shown is an estimate.
As the cooking process continues, the
time left is revised continuously, and a
more accurate figure is shown.
The time left will be deleted if the
cooking or core temperature is changed
or if a different mode is selected. If the
door is opened for a longer time, the
time left will be recalculated.
Alternating between the time left and
core temperature displays
As soon as the time left is shown, you
can alternate between the time left and
core temperature displays
 Select Change.
 Select Status.
 Select whether you would like the
time left or core temperature to
appear in the display.
 Confirm with OK.