Operation Manual

Warning and Safety instructions
11
 T
ampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Never open the casing of the appliance.
 While the appliance
is under guarantee, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.
 Miele
can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
 If the connection cable is damaged or if the oven is supplied
without a cable, it must be r
eplaced or fitted with a special
connection cable by a Miele authorised technician (see "Electrical
connection").
 During
installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply, e.g. if the
oven lighting is faulty (see "Problem solving guide" and "Electrical
connection").
 In or
der to function correctly, the oven requires an adequate
supply of cool air. Ensure that the supply of cool air is not impaired
(e.g. by heat insulation strips in the housing unit). Please also ensure
that the cool air supply is not unduly heated by other heat sources
such as a solid fuel stove.
 If
the oven is installed behind a furniture panel (e.g. a door),
ensure that the door is never closed whilst the oven is in use. Heat
and moisture can build up behind a closed furniture panel and cause
subsequent damage to the oven, the housing unit and the floor. Do
not close the door until the oven has cooled down completely.