Operation Manual

Settings
45
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
If demo mode is activated Demo mode
active. The appliance will not heat up will
appear when the oven is switched on.
– On
Touch OK for at least 4 seconds to
activate demo mode.
– Off
Touch OK for at least 4 seconds to
deactivate demo mode. The oven
can then be used as normal.
Factory default
– Settings
Any settings that you have altered
will be reset to the factory default
setting.
– User programmes
All user programmes will be deleted.
– Recommended settings
Power levels which have been
changed will be reset to the factory
default settings.
– Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.