Operation Manual

Settings
33
Altering the time of day
The time of day can only be changed
when the functi
on selector is at .
 Select .
 Use the r
otary selector to move
the  triangle until it appears
under .
 Confirm with OK.
The triangle  will flash under .
 Use the r
otary selector to enter the
time of day.
 Confirm with OK.
The time of day is now saved.
In the event of a power cut the time of
day is saved f
or approx. 200 hours. If
power is restored within this time the
current time of day is displayed.
After a longer power cut, the time of
day needs t
o be re-entered.