Operation Manual

Problem solving guide
103
Problem Cause and remedy
The oven lighting does
not switch on.
The halogen lamp needs replacing.
 Danger of burning.
Make sure the oven heating elements are switched
off and that the oven cavity is cool.
The lamp cover consists of two parts, a glass
piece and mounting. It can get damaged if it falls.
Hold the lamp cover securely when removing it so
that it does not fall
. Place a tea towel over the floor
of the oven and the open door to protect them.
 Discon
nect the appliance from the mains.
 Remove the scr
ew to the lamp cover using a T20
Torx screwdriver, and take off the cover.
 Do not t
ouch the halogen lamp with bare fingers.
Please follow the manufacturer's instructions.
Remove the halogen lamp.
 Replace it with a new halogen lamp (Osram
66725, 230V, 25W, thermally stable up to 300°C,
G9 fitting).
 Replace the gl
ass piece in the mounting, and refit
the lamp cover. Make sure that the lug on the
mounting is correctly located in the notch in the
roof of the oven, then screw the mounting back
into place.
 Recon
nect the oven to the electricity supply.