Operation Manual

Problem solving guide
100
Problem Cause and remedy
A function has been
sele
cted and the time of
day and the  symbol
are still in the display.
The system lock  has been activa
ted.
 S
witch off the system lock (see "System lock ").
The oven does not heat
up.
Demo mode has been activated. 
 appears in the
display.The oven can be operated but does not heat
up.
 Deac
tivate demo mode (see "Settings –  ").
A function has been
sele
cted but the oven is
not working.
There has been a power cut which has caused a
cur
rent process to stop.
 T
urn the function selector to the • position and
switch the oven off. Start the cooking process
again.

has appeared in
the display with the
triangle  flashing
under .
The power supply was interrupted for longer than 200
hours.
 Reset the time of day (see "Using for the first
time").
 has appear
ed
unexpectedly in the
display and  is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long
time
and this has activated the safety switch-off
function.
 T
urn the function selector to • and switch the oven
off. The oven is now ready to use again
immediately.
  appears in the
display,
There is a problem that you cannot resolve.
 C
all the Miele Service Department.
If the door is opened
whilst using Micr
owave
solo , the oven stops
making a noise.
This is not a fault. If the door is opened while
Micr
owave solo  is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
A noise can be heard
after a cooking
process.
The cooling fan is switched on.
It will switch off automatically after a while.