User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Overview
- Oven controls
- Features
- Data plate
- Items supplied
- Accessories supplied and available to order
- Shelf runners
- Baking tray, universal tray and rack with non-tip safety notches
- FlexiClip telescopic runners HFC 70-C
- Fitting the FlexiClip telescopic runners
- Removing the FlexiClip telescopic runners
- FlexiClip telescopic runners HFC 7x
- Fitting and removing the FlexiClip telescopic runners
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- Grilling and roasting insert HGBB 71
- HUB Gourmet oven dishes HBD Gourmet oven dish lids
- Catalytic enamelled accessories
- Handle HEG
- Accessories for cleaning and care
- Functions
- Safety features
- PerfectClean treated surfaces
- Cooktop controls
- Before using for the first time
- Overview of functions
- Energy saving tips
- Operation
- Clock/Timer
- Baking
- Roasting
- Grilling
- Other applications
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the telescopic runners)
- Stubborn soiling on the FlexiClip telescopic runners
- Cleaning the catalytic enamelled back panel
- Removing the door
- Dismantling the door
- Fitting the door
- Removing the shelf runners with FlexiClip telescopic runners
- Removing the back panel
- the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
Warning and Safety instructions
9
Miele can only guarantee the safety of the appliance when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.
If the oven is delivered without a mains connection cable, a
special cable must be installed by a suitably qualified and competent
person (see “Installation - Electrical connection”).
If the mains connection cable is damaged, it must be replaced with a
special connection cable by a suitably qualified and competent person
(see “Installation - Electrical connection”).
During installation, maintenance and repair work, e.g. if the oven
lighting is faulty, the oven must be completely disconnected from the
electricity supply (see “Problem solving guide”). To ensure this:
– Switch off the mains circuit breaker, or
– switch off at the wall socket and withdraw the plug. To do this,
pull the plug and not the mains connection cable.
The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g. by heat insulation strips fitted in the housing unit).
Furthermore, the required supply of cool air must not be excessively
heated by other heat sources (e.g. solid fuel stoves).
If the oven is built in behind a furniture front (e.g. a door), do not
close the furniture door while the oven is in use. Heat and moisture
can build up behind the closed furniture door. This can result in
damage to the oven, housing unit and floor. Leave the furniture door
open until the oven has cooled down completely.