User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Overview
- Oven controls
- Features
- Data plate
- Items supplied
- Accessories supplied and available to order
- Shelf runners
- Baking tray, universal tray and rack with non-tip safety notches
- FlexiClip telescopic runners HFC 70-C
- Fitting the FlexiClip telescopic runners
- Removing the FlexiClip telescopic runners
- FlexiClip telescopic runners HFC 7x
- Fitting and removing the FlexiClip telescopic runners
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- Grilling and roasting insert HGBB 71
- HUB Gourmet oven dishes HBD Gourmet oven dish lids
- Catalytic enamelled accessories
- Handle HEG
- Accessories for cleaning and care
- Functions
- Safety features
- PerfectClean treated surfaces
- Cooktop controls
- Before using for the first time
- Overview of functions
- Energy saving tips
- Operation
- Clock/Timer
- Baking
- Roasting
- Grilling
- Other applications
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the telescopic runners)
- Stubborn soiling on the FlexiClip telescopic runners
- Cleaning the catalytic enamelled back panel
- Removing the door
- Dismantling the door
- Fitting the door
- Removing the shelf runners with FlexiClip telescopic runners
- Removing the back panel
- the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
88
Installing the cooker
Connect the cooker to the electrical
supply.
Place the cooker in front of the base
unit.
Insert the plug of the built-in cooktop
into the connection on the cooker.
Lifting the oven by the door handle
could cause damage to the door.
Use the handle cut-outs on the side
of the housing to lift the appliance.
It is a good idea to remove the door
(see “Cleaning and care - Removing
the door”) and the accessories before
installing the appliance. This makes
the cooker lighter when you push it
into the housing unit and you do not
run the risk of lifting it by the door
handle.
Push the cooker into the base unit
and align it.
Open the door (if you have not
removed it previously).
Secure the cooker to the side walls of
the housing unit using the screws
supplied.
Refit the door, if necessary (see
“Cleaning and care - Refitting the
door”).