User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Overview
- Oven controls
- Features
- Data plate
- Items supplied
- Accessories supplied and available to order
- Shelf runners
- Baking tray, universal tray and rack with non-tip safety notches
- FlexiClip telescopic runners HFC 70-C
- Fitting the FlexiClip telescopic runners
- Removing the FlexiClip telescopic runners
- FlexiClip telescopic runners HFC 7x
- Fitting and removing the FlexiClip telescopic runners
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- Grilling and roasting insert HGBB 71
- HUB Gourmet oven dishes HBD Gourmet oven dish lids
- Catalytic enamelled accessories
- Handle HEG
- Accessories for cleaning and care
- Functions
- Safety features
- PerfectClean treated surfaces
- Cooktop controls
- Before using for the first time
- Overview of functions
- Energy saving tips
- Operation
- Clock/Timer
- Baking
- Roasting
- Grilling
- Other applications
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the telescopic runners)
- Stubborn soiling on the FlexiClip telescopic runners
- Cleaning the catalytic enamelled back panel
- Removing the door
- Dismantling the door
- Fitting the door
- Removing the shelf runners with FlexiClip telescopic runners
- Removing the back panel
- the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
Problem solving guide
81
Problem Possible cause and remedy
The FlexiClip telescopic
runners do not push in
or pull out smoothly.
The bearings in the FlexiClip telescopic runners are
not sufficiently lubricated.
Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed to
withstand the high temperatures in the oven
compartment. Other lubricants may harden and
stick to the FlexiClip telescopic runners when they
are heated. You can obtain the special Miele
lubricant from your Miele dealer or from Miele.
The top oven lighting
does not switch on.
The halogen lamp is faulty and needs replacing.
Danger of burning!
Make sure the oven heating elements are switched
off. Make sure the oven compartment has cooled
down.
Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket, or switch off at the mains circuit breaker.
Turn the lamp cover a quarter turn anti-clockwise
to release it and then pull it together with its seal
downwards to take it out.
Replace the halogen lamp (Osram66725 AM/A,
230V, 25W, G9).
Refit the lamp cover together with its seal and turn
clockwise to secure.
Reconnect the oven to the electricity supply.
You have selected the Eco Fan Heat function. The
oven lighting does not switch on with this function.