User Manual

Problem solving guide
79
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Problem Possible cause and remedy
The display is dark. There is no power to the oven.
 Check whether the mains circuit breaker has
tripped. If it has, contact a qualified electrician or
Miele.
The oven does not heat
up.
The system lock  has been switched on.
 Switch off the system lock (see “Clock/Timer -
Changing settings”).
There is no power to the oven.
 Check if the circuit breaker has tripped. If it has,
contact a qualified electrician or Miele.
 is flashing in the
display.
There has been a power cut.
 Reset the time of day (see “Using for the first
time”).
Cooking times will also need to be reset.
 appears
unexpectedly in the
display and  is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
 Turn the function selector to 0. The oven is now
ready to use again immediately.
 appears in the
display.
A fault has occurred that you cannot resolve.
 Call Miele.
The signal tone does
not sound.
Signal tones are switched off.
 Switch on the signal tones (see “Clock/Timer -
Changing settings”).