User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Overview
- Oven controls
- Features
- Data plate
- Items supplied
- Accessories supplied and available to order
- Shelf runners
- Baking tray, universal tray and rack with non-tip safety notches
- FlexiClip telescopic runners HFC 70-C
- Fitting the FlexiClip telescopic runners
- Removing the FlexiClip telescopic runners
- FlexiClip telescopic runners HFC 7x
- Fitting and removing the FlexiClip telescopic runners
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- Grilling and roasting insert HGBB 71
- HUB Gourmet oven dishes HBD Gourmet oven dish lids
- Catalytic enamelled accessories
- Handle HEG
- Accessories for cleaning and care
- Functions
- Safety features
- PerfectClean treated surfaces
- Cooktop controls
- Before using for the first time
- Overview of functions
- Energy saving tips
- Operation
- Clock/Timer
- Baking
- Roasting
- Grilling
- Other applications
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the telescopic runners)
- Stubborn soiling on the FlexiClip telescopic runners
- Cleaning the catalytic enamelled back panel
- Removing the door
- Dismantling the door
- Fitting the door
- Removing the shelf runners with FlexiClip telescopic runners
- Removing the back panel
- the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
Cleaning and care
73
Risk of injury caused by the door
slamming shut.
The door may slam shut if you
attempt to disassemble it when it is
fitted to the oven.
Always remove the door before
disassembling it.
Place the door with the outer glass
pane on a soft surface (e.g. a tea
towel) to prevent it getting scratched.
The door handle should line up with
the edge of the table so that the glass
lies flat and does not get broken
during cleaning.
Flip the two glass pane retainers
outwards to open them.
To remove the inner panes:
Gently lift the inner pane up and out
of the plastic strip.
Lift the middle pane up gently and
pull it out.
Clean the door panes and other
individual parts with a clean sponge
and a solution of hot water and
washing-up liquid or a clean, damp
microfibre cloth.
Dry all parts with a soft cloth.