User Manual

Clock/Timer
39
How to set the time or a
duration
Times are set in segments:
– for the time of day and cooking
durations, first the hours, then the
minutes.
– for a minute minder duration, first the
minutes, then the seconds.
 Confirm with OK.
Depending on the position of the
function selector, the functions , ,
 or  will appear.
 Highlight the required function using
the  or  sensor.
The corresponding symbol will flash for
approx. 15 seconds.
 While the symbol is flashing, confirm
with OK.
The function is selected and the left
numeric block will start to flash.
You can only set the time while the
numeric block is flashing. If the time
has elapsed and the numeric block is
no longer flashing, you have to select
the function again.
 Set the required value using the  or
 sensor.
 Confirm with OK.
The right numeric block will flash.
 Set the required value using the  or
 sensor.
 Confirm with OK.
Your time/duration setting is now saved.
Displaying times/durations
If you have set times, the symbols 
and  or  indicate which time
functions have been set.
If you are using the minute minder,
cooking duration and end of cooking
time functions simultaneously, the
last time that you set will be displayed.
If you have set a cooking duration, the
time of day cannot be displayed.
When the time/duration has elapsed
Once a set time has elapsed, the
relevant symbol will flash and a signal
will sound, if this option is selected (see
“Clock/Timer - Changing settings”).
 Confirm with OK.
The signal tone will stop and the
symbols in the display will go out.