Operating and Installation Instructions Oven H 6780 BP H 6880 BP To prevent accidents and machine damage, read these instructions before installation or use. en – US, CA M.-Nr.
Technical Service After sales service Warranty In the event of a fault which you cannot easily correct yourself, please contact: For further information, please refer to your warranty booklet. – your Miele dealer, or – the Miele Technical Service Department. See back cover for contact details. Please quote the model and serial number of your appliance when contacting Miele. This information is given on the data plate, visible on the front frame of the oven, with the door fully open.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Do not dispose of this appliance with your household waste. Old appliances may contain materials that can be recycled.
Plumbing Notes on connecting to the water supply The appliance may only be connected to the water supply by a qualified professional. Disconnect the appliance from the power supply before connecting it to the water line. Turn off the water supply before connecting the water intake lines for the oven. – All devices used for connecting the appliance to the water supply must comply with the current national and local safety regulations in the country in which the appliance is being installed.
Plumbing Attaching the stainless steel hose to the oven Make sure that the stainless steel hose is not kinked or damaged. The stainless steel hose must not be shortened. Remove the cover from the hard water port at the back of the oven. Take the angled side of the stainless steel hose and check whether a sealing ring is present. If necessary, insert one. Screw the stainless steel hose coupling nut onto the threaded union. Ensure that the hose is correctly fitted and that it is water-tight.
Electrical connection CAUTION: Electrical connection Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. The oven is equipped with a power cord approx. 7' 2" (2.2 m) in length with a NEMA 14-30 P plug ready for connection to the power supply: Installation, repair and maintenance work must be performed by a Miele authorized service technician.
Installation diagrams Appliance and cut-out dimensions Miele ovens can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer.
Installation diagrams Installation into a tall cabinet 23 3/4" (603 mm) 24" 28 1/4" (718 mm) (610 mm) A 22 9/16" (573 mm) 28 7/16" (722 mm) 4" (100 mm) 28 1/2" (724 mm) 26 3/8" (670 mm) 28 5/8" (727 mm) 27 3/4" (705 mm) B 29 13/16" (757 mm) 7/8" (22*/23** mm) Cut-out (4" x 28" / 100 mm x 720 mm) in the bottom of the cabinet for power cord and ventilation Power cord with plug * ** Oven with glass front Oven with metal front Front design may vary depending on model.
Installing the oven The oven must not be operated until it has been properly installed within cabinetry. The oven must have an adequate supply of cool air for proper operation. The required air must not be heated excessively by other heat sources, e.g. wood burning stove. Observe the following when installing: Build into cabinetry with no back wall. Make sure that the shelf that the appliance sits on does not touch the wall. Do not install insulation strops on the side walls of the cabinet housing.
Copyright and licenses Miele uses software to operate and control the appliance. The copyright authorisation from Miele and other relevant software suppliers (e.g. Adobe) must be respected. Miele and their suppliers reserve the rights to the software components. In particular the following are prohibited: – copying and distribution, – modifications and derivations, – decompilation, reverse engineering, disassembling and other such reductions of software.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
H6780BP; H6880BP en – US, CA M.-Nr.
