Technical data
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 3
- Functional description 7
- Guide to the Ventilation System 8
- Operation 10
- Cleaning and Care 12
- After Sales Service 16
- Installation instructions 17
- Caring for the environment 18
- Appliance dimensions 19
- Structural support 21
- Installation 22
- Electrical connection 23
- Air extraction 24
- Technical data 26
Installation instructions
^
See the enclosed installation
instruction diagram.
^
Please read the "Important Safety
Instructions" and Installation
instructions before installing this
hood.
Installation accessories
4 Screws8x60mmwith
4 Washers
(S10 wall anchors included in the
packaging are not for use in USA / CDN)
2 screws M4x8mmfor adjusting the
chimney.
4 leveling plates for correcting an
uneven ceiling.
1 exhaust connector
Recirculation mode
If site conditions are not suitable for the
hood to be used for air extraction, the
appliance must be converted for
recirculation.
For recirculation mode a conversion kit
must be installed, available from Miele.
The conversion kit comes with an
Installation manual.
After the hood is installed the charcoal
filter must be inserted. See "Cleaning
and Care".
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
Installation
22