Technical data

If the front of the unit is ceiling height
then an appropriate cut-out must be
made in the front panel
e
.
When fitting the ventilation grille make
sure that the slats in the grille point to-
wards the centre of the room and not to-
wards a wall or the ceiling.
The slot for the active charcoal filter is
located on the front of the appliance.
Install the active charcoal filter (see
“Cleaning and care”).
11. Electrical connection
Refer to the notes in “Electrical con-
nection” and “Warning and Safety
instructions” before connecting to
the electricity supply.
EXT model cooker hoods are de-
signed for use with an external fan,
i.e. the fan is fitted outside the room
in a position of your choice.
Electrical connection is made via a con-
necting lead with plug and coupling.
Separate fitting instructions are sup-
plied with the external fan.
Special fitting instructions
Fitting into wall unit with 19 mm
thick carcase sides
The runners have to be adapted as
shown above.
Screw the runners to the wall unit
with the "19 mm" marking facing up-
wards as shown above.
Installation
33