Technical data

Stick the furniture lightshield to the
grip in the position required.
Dismantle the grip again and secure
the lightshield to the grip using five
3.0 x15 mm, two at either side and
one in the middle.
Fit the lightshield back on to the ap-
pliance again.
8. Align the depth of the
appliance
To move the appliance further out of
the wall unit:
Loosen screws
c
and tighten
screws
f
.
Tighten screws
c
again to secure it
into position.
To move the appliance further into
the wall unit:
Loosen screws
f
and tighten
screws
c
.
Tighten screws
f
again to secure it
in position.
Check the alignment again by pull-
ing the deflector plate out and push-
ing it back in again.
Installation
29