Operation Manual

Timer - use
Time of day – 24 hour display
When the colon in the time display
– flashes:
Once the time has been entered it
proceeds in minute intervals.
– is on constantly:
Time of day has been halted and
can be entered or altered.
When the appliance is first con-
nected to the power supply, or after a
power cut “12:00” and the symbols
“f” and “)” flash in the display.
If a process has been pre-pro-
grammed, the time of day can not
be altered or cancelled.
To alter the time of day:
Press the buttons “f” and “)” at
the same time.
– “12:00” shows in the display,
– the – /+ button indicator lights up.
Using the – /+ button enter the time
of day in hours : minutes.
To cancel the time of day display
Press the buttons “f” and “)”
twice in succession.
The time of day continues to run un-
seen.
A process can be programmed
even if the time of day display is un-
seen.
To bring back the visible time display
Press buttons “f” and “)”
together once.
17