Operating instructions/Installation instructions

Frequently Asked Questions
99
Fault messages
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before remedying the fault:
 Turn off the dishwasher.
Fault F: Technical fault.
Switch the appliance off and
back on again. Read the
Operating Instructions for
additional details.
There may be a technical fault.
 Turn the dishwasher back on after a few seconds.
 Select the program you want to use.
 Close the door.
If the fault message appears again, there is a techni-
cal fault.
 Turn off the dishwasher.
 Close the faucet.
 Contact Miele Customer Service.
Waterproof fault. Turn
the appliance off, close the
water supply and contact
Miele Service.
The Waterproof system has reacted.
 Turn off the dishwasher.
 Turn off the water supply.
 Contact Miele Customer Service.
Fault F 78: A technical
fault has occcurred. Turn off
the appliance, close the wa-
ter supply and contact Miele
Service.
Circulation-pump fault.
 Turn off the dishwasher.
 Turn the dishwasher back on.
 Select the desired program.
 Close the door.
If the fault message appears again, there is a techni-
cal fault.
 Turn off the dishwasher.
 Turn off the water supply.
 Contact Miele Customer Service.