Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time
- Water hardness
- AutoDos (AutoDos)
- Rinse aid
- Miele@home
- Remote control
- Remote Update
- SmartStart
- EcoStart
- Temperature
- Display brightness
- Volume
- Memory
- Refill indicators
- AutoOpen
- 2nd interim rinse
- Knock2open
- BrilliantLight
- SaniWash Cycle
- Software version
- Legal Information
- Copyrights and licenses for operator and control software
- Copyrights and licenses for the communication module
- Showroom
- Factory default
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Cleaning and care
91
Cleaning the spray arms
Particles of food can get stuck in the
spray-arm jets and bearings. The spray
arms should therefore be inspected reg-
ularly (approx. every 2–4months).
Never run a wash program without
using the spray arms.
Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash program without
the lower spray arm or without the fil-
ters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
Turn off the dishwasher.
Removing the cutlery tray (if present)
In order to be able to remove the upper
spray arm, you first have to remove the
cutlery tray (if present).
Pull out the cutlery tray.
Press the rail safety clips on both
sides of the cutlery tray together
and remove the safety clips.
Take out the cutlery tray completely.