Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time
- Water hardness
- AutoDos (AutoDos)
- Rinse aid
- Miele@home
- Remote control
- Remote Update
- SmartStart
- EcoStart
- Temperature
- Display brightness
- Volume
- Memory
- Refill indicators
- AutoOpen
- 2nd interim rinse
- Knock2open
- BrilliantLight
- SaniWash Cycle
- Software version
- Legal Information
- Copyrights and licenses for operator and control software
- Copyrights and licenses for the communication module
- Showroom
- Factory default
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Cleaning and care
89
Cleaning the AutoDos assem-
bly
If the Clean AutoDos message is dis-
played, check that the fill channel is
clean, and clean it if necessary, e.g.,
powder residues. This helps keep the
AutoDos working properly.
In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed.
1 PowerDisk holder
2 Fill channel for dispensing the deter-
gent from the PowerDisk into the wash
cabinet
Turn the AutoDos lid to and open
it.
Remove the PowerDisk if appropriate.
Pull the PowerDisk holder upward by
the yellow tabs and remove it. When
doing so, do not pull on the side tab.
Use the tab (see the arrow) to re-
lease the fill channel and pull it out
.