Operating instructions/Installation instructions

Operation
74
Interrupting a program
A program will be interrupted as soon
as the door is opened.
After 4seconds, the message Press
“OK” to continue will appear on the dis-
play.
 Confirm with OK and close the door
within 4seconds.
The program will continue from the
point at which it was interrupted.
 Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Canceling or changing a pro-
gram
If a program is canceled, important
program stages may be missed.
A program should only be canceled
in the first few minutes.
If a program has already started and
you wish to cancel it, proceed as fol-
lows:
 Open the door.
 Touch the Back sensor button.
 Confirm the query with Yes.
The program is canceled.
If you would like to select another pro-
gram:
 Touch the Back sensor button.
The display will change back to the Pro-
grams menu.
 If you have dispensed detergent
manually, check whether the deter-
gent compartment is still closed.
If the lid is already open, fill it with de-
tergent again and close the lid.
 Select the program you want, and
then start it by shutting the door
within 4seconds.
The in-operation indicator light comes
on to show that a program has been
started.