Operating instructions/Installation instructions

Settings
39
Displaying the Connection status
You can call up the current connection
status of your dishwasher.
 Select the Connection status menu op-
tion and confirm with OK.
 Use the sensor buttons to con-
secutively call up the WiFi signal
strength, the name of your router, and
the associated IP address.
 Select OK to confirm the messages.
Set up again
This menu option only appears if you
have already connected your dish-
washer to your WiFi network.
Connecting via the app
 Select the App menu option and con-
firm with OK.
 Follow the instructions in the app.
Connecting via WPS
 Select the WPS menu option and
confirm with OK.
 Follow the instructions on the display.
Reset network configuration?
This menu option only appears if you
have already connected your dish-
washer to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.
 Select the Reset network configuration?
menu option.
 Select the Yes option and confirm
with OK.