Operating instructions/Installation instructions

ManualsBrandsMiele ManualsBuilt-InG 7966 SCVi AutoDos - Fully integrated dishwashers - the Miele all-rounder for handleless kitchen designs

Table Of Contents

Contents

Frequently Asked Questions

105

Spray arm fault

Problem Possible cause and solution

During the program and

at the end of the pro-

gram, the display shows

the following message:

Check spray arms

The dishwasher does

not turn off at the end

of the program.

The dishware may not

be clean because no

detergent was dis-

pensed. The AutoDos

function is automati-

cally deactivated during

the program sequence.

The lower spray arm is blocked or the nozzles of the

lower spray arm are clogged. The AutoDos function

is automatically deactivated during the program be-

cause the AutoDos detergent outlet cannot be com-

pletely flushed out.

 Turn the dishwasher off and back on again.

Messages appear in the display.

 Perform a rotation check of the lower spray arm

and rearrange the wash items if they are blocking

the spray arm.

 Clean the lower spray arm (see “Cleaning the

spray arms” under “Cleaning and care”).

 Select OK to confirm each message.

 Start the program again.