Installation Instructions

Options
76
Setting “Start at”
With the Start at function, you set the
exact time at which you want the pro-
gram to start.
 Set the hours with the sensor
buttons.
 Touch the minute number block.
 Use the sensor buttons to enter
the minutes and confirm your entry
with OK.
The saved start time for the selected
program will appear in the display for
several minutes.
 Close the door.
When the set time is reached, the pro-
gram selected will begin automatically.
Setting “Finish at”
Use the Finish at function to set the lat-
est time by which the program selected
has to be finished.
 Set the hours with the sensor
buttons.
 Touch the minute number block.
 Use the sensor buttons to enter
the minutes and confirm your entry
with OK.
The estimated start time for the se-
lected program will appear in the dis-
play for several minutes.
A message will appear in the display if
the program cannot be completed by
the set finish time because it has too
long a cycle time.
 If it appears, confirm the message
with OK.
 Close the door.
The program will start automatically
when the estimated start time is
reached.