Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time of day
- Water hardness
- AutoDos (AutoDos)
- Rinse Aid
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Extra Clean
- Extra Dry
- 2nd interim rinse
- Hygiene cycle
- Software version
- Showroom program
- Factory default
- Copyrights and licenses for the communication module
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Program options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Cleaning and care
91
Cleaning the drain pump
If water remains in the wash cabinet af-
ter the end of a program, the water has
not been pumped away. The drain
pump may be blocked by foreign ob-
jects. These foreign objects are easy to
remove.
Disconnect the dishwasher from the
power supply.
To do this, turn off at the electrical
socket and withdraw the plug.
Take the filter combination out of the
wash cabinet (see “Cleaning the fil-
ters” under “Cleaning and care”).
Scoop the water out of the wash cab-
inet using a suitable small container
or utensil.
Press the catch of the drain pump
cover inwards.
Tip the cover inwards until it is re-
leased.
Rinse the cover thoroughly under run-
ning water and remove all foreign ob-
jects.