Installation Instructions

Settings
40
SmartStart
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
“Miele@home” under “Settings”).
The SmartStart function is used for start-
ing your dishwasher automatically at a
time when your energy costs are most
economical.
To use this function you may need fur-
ther technical accessories.
If you have activated SmartStart Permit-
ted, the Timer menu of the selected
program will no longer show EcoStart
but will instead show SmartStart. The
dishwasher will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest possible
start time, the dishwasher will start au-
tomatically.
EcoStart
This option is not available in all areas.
In order to run your dishwasher in the
most economical way, you can use the
EcoStart option to take advantage of
your electricity supplier’s cheaper en-
ergy tariffs (see “Timer” under “Op-
tions”).
With this option selected, your dish-
washer will start automatically at your
electricity supplier’s cheapest rate
times.
To use this option, you must first set up
to 3 electricity rate time zones in which
the dishwasher can start. You can allo-
cate different priorities to these time
zones. The time with the cheapest elec-
tricity rate will be given Priority 1.
Contact your electric supplier to find
out the times of the cheapest electricity
rates.
Once the electricity rate times have
been set, you can use the EcoStart op-
tion to set the latest finish time required
for each program.
The dishwasher will then start automati-
cally during the cheapest energy rate
time period. The program will end at the
set finish time at the latest.