Installation Instructions

Frequently Asked Questions
101
General dishwasher problems
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The indicator light of
the selected program is
flashing and the mes-
sage Continue with OK ap-
pears in the display.
The dishwasher does
not start or the Flex-
iTimer stops running.
The safe mode of the dishwasher was activated.
This takes place in the following instances:
– If you do not close the door within 4seconds of
the last press of a sensor button at program
start.
– If the door is open for longer than 4seconds
during a program or before the FlexiTimer start
time is reached.
 Press the OK sensor button and close the door
within 4seconds.
The indicator lights and
the display are dark.
The dishwasher has turned off automatically to save
energy.
 Turn the dishwasher back on using the sensor
button.
Detergent residue is left
in the detergent com-
partment at the end of a
program.
The detergent compartment was still damp when de-
tergent was added.
 Only add the detergent when the detergent com-
partment is dry.
The detergent compart-
ment lid cannot be
closed.
Residual detergent is blocking the catch.
 Remove the residual detergent.
At the end of a program
there is a film of mois-
ture on the inside of the
door and possibly on
the interior cabinet
walls.
This is part of the normal function of the drying sys-
tem. The moisture will dissipate after a short time.