Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time of day
- Water hardness
- AutoDos (AutoDos)
- Rinse Aid
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Extra Clean
- Extra Dry
- 2nd interim rinse
- Hygiene cycle
- Software version
- Showroom program
- Factory default
- Copyrights and licenses for the communication module
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Program options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Frequently Asked Questions
100
Spray arm fault
Problem Possible cause and solution
During the program and
at the end of the pro-
gram, the display shows
the following message:
Check spray arms
The dishwasher does
not turn off at the end
of the program.
The dishes may not be
clean because no deter-
gent was dispensed.
The AutoDos func-
tion is automatically de-
activated during the
program sequence.
The lower spray arm is blocked or the nozzles of the
lower spray arm are clogged. The AutoDos func-
tion is automatically deactivated during the program
because the AutoDos detergent outlet cannot be
completely flushed out.
Turn the dishwasher off and back on again.
Messages appear in the display.
Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.
Clean the lower spray arm (see “Cleaning the
spray arms” under “Cleaning and care”).
Select OK to confirm each message.
Start the program again.